Alesis M1 Active Mk2 manual Avoiding Damage

Page 32

Speaker Installation

AVOIDING DAMAGE

The best protection against speaker failure is to mix at a reasonable listening level. With a +4 dBu input and the input level control set to “6”, the M1 Active Mk2 speakers produce a sound pressure level (SPL) of 85 decibels at 1 meter, which is a good working level for mixing. At maximum output before clipping, they can generate peak levels ≥ 118 dB SPL at one meter – a level which may cause hearing loss after prolonged exposure. While the biamplified design of the M1 Active Mk2 avoids the common “blown tweeter” problem of conventional designs (when a broadband amplifier clips on a bass note, it sends unusually high energy to the tweeter, which tries to reproduce the square wave), it is not invulnerable. If you need higher power levels, you are not using the speaker in a near-field application. For extremely loud mid-field and far-field monitoring, we recommend the Alesis Monitor Two speaker with a 300-watt per channel amplifier. Many studios will check recordings on both systems, alternating to avoid ear fatigue and to gain perspective on the mix.

30

M1 Active Reference Manual

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Reference Manual Alesis Contact Information Contents HOW to USE this Manual IntroductionPlease Follow These Precautions When Using this Product Important Safety InstructionsSafety Symbols Used in this Product Contents/Safety Warnings Symboles Utilisés Dans CE Produit Instructions DE Sécurité Importantes FrenchContents/Safety Warnings ICES-003 Issue CE Declaration of Conformity Chapter About the M1 Active MK2Unpacking and Inspection About Powered Monitors Inside Your NEW SpeakersMagnetic Shielding ToneAbout the Drivers M1 Active MK2 BI-AMPLIFIERS & Electronic Crossovers M1 Active MK2 Power Supply Cabinet and Port DesignWHY the Tweeters are Offset About Nearfield Monitoring About the M1 Active Mk2 Speaker Installation Avoiding Reflections in the StudioReflection Prime Listening Position Stereo Nearfield Placement M1 Active MK2 Horizontal Placement Recommendation Vertical Placement Recommendation Playback Check Mode Vertical MID-FIELD Plugging the Ports to Adjust for Room Acoustics Speaker Installation AC Power Cable USE Clean PowerConnections GroundingPower Switch Input ConnectionsSetting the Input Level Control 85.0 Avoiding Damage Surround Sound About Surround SoundCenter Speakers in Music Mixes Placement of the Center M1 Active MK2 Speaker in the Studio Placement of Rear Surrounds Recommended positioning of surround speakersSurround Sound Wall Mounting Surround Sound Surround Sound Troubleshooting Troubleshooting IndexMaintenance CleaningService Obtaining Repair ServiceCustomers outside the USA and Canada Transducers SpecificationsEnclosure Crossover Section Amplifier SectionAcoustic Section GeneralIndex LineAlesis Limited Warranty Please Send in Your Warranty CardM1 Active Reference Manual

M1 Active Mk2 specifications

The Alesis M1 Active Mk2 is a well-regarded studio monitor designed for musicians, producers, and audio engineers seeking high-quality sound reproduction at an accessible price point. With a focus on delivering accurate sound and a balanced performance, the M1 Active Mk2 has become a popular choice for both home studios and professional environments.

One of the standout features of the M1 Active Mk2 is its bi-amplified design. Each speaker is powered by dedicated amplifiers that optimize the performance of the woofer and tweeter separately. This bi-amplification ensures clear and precise sound reproduction across the frequency spectrum. The 6.5-inch low-frequency driver is designed to deliver robust bass response while the 1-inch silk dome tweeter provides smooth high-frequency performance, resulting in a well-rounded audio experience.

The M1 Active Mk2 incorporates advanced technologies to enhance its performance. The monitor features a front-firing bass port that helps to minimize boundary coupling and improves the overall bass response, allowing for placement flexibility within the studio. This design reduces the risk of unwanted resonances caused by proximity to walls, ensuring accurate sound even in challenging acoustic environments.

Another important characteristic of the M1 Active Mk2 is its frequency response, which ranges from 55 Hz to 20 kHz. This wide frequency range makes it suitable for various musical genres and audio applications, enabling users to hear detailed nuances in their mixes. Additionally, the monitor is equipped with a rear-mounted EQ control, allowing users to tailor the sound to their specific acoustic space, mitigating the effects of room acoustics on playback.

Durability and design are also key aspects of the M1 Active Mk2. Its rugged enclosure is built to withstand the rigors of studio use while also providing a sleek and professional appearance. The monitors can be easily positioned on desktop surfaces or mounted on stands, making them versatile for different studio setups.

Overall, the Alesis M1 Active Mk2 stands out as a reliable and affordable option for anyone looking to improve their audio monitoring capabilities. With its bi-amplified design, advanced technologies, and customizable features, this studio monitor delivers impressive sound quality suitable for both amateur and professional recording applications. Whether mixing, mastering, or simply enjoying music, the M1 Active Mk2 is designed to deliver a true-to-source listening experience.
Top Page Image Contents