Alesis M1 Active Mk2 manual Horizontal Placement Recommendation

Page 23

Speaker Installation

HORIZONTAL PLACEMENT RECOMMENDATION

Traditionally, proper horizontal placement of speaker systems slightly behind (not on) a meter bridge accomplished two purposes: it allowed both woofer and tweeter to be at ear level, and many times, it permitted the recording engineer to see over the speakers and into the studio.

Horizontal placement is a recommended arrangement with the M1 Active Mk2 because the left and right mirror-imaged pair permits a symmetrical alignment of drivers and ports. This will be conducive to a balanced mix. See Figure 2 below.

Proper tweeter orientation is toward the stereo image center (the middle) as shown. Ports are always faced toward the bottom side of the cabinet. This set- up will promote a strongly focused center image such as for the vocalist. And because the (vocal) image width will be narrower than if the speakers are placed vertically, it will be possible to place the vocalist with great precision at stage center. In this orientation there will be much less chance of first reflections from either sidewalls or the console coloring your mix.

M1 Active Mk2 Reference Manual

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Reference Manual Alesis Contact Information Contents Introduction HOW to USE this ManualPlease Follow These Precautions When Using this Product Important Safety InstructionsSafety Symbols Used in this Product Contents/Safety Warnings Instructions DE Sécurité Importantes French Symboles Utilisés Dans CE ProduitContents/Safety Warnings ICES-003 Issue CE Declaration of Conformity Chapter About the M1 Active MK2Unpacking and Inspection Inside Your NEW Speakers About Powered MonitorsMagnetic Shielding ToneAbout the Drivers M1 Active MK2 BI-AMPLIFIERS & Electronic Crossovers Cabinet and Port Design M1 Active MK2 Power SupplyWHY the Tweeters are Offset About Nearfield Monitoring About the M1 Active Mk2 Avoiding Reflections in the Studio Speaker InstallationReflection Prime Listening Position Stereo Nearfield Placement M1 Active MK2 Horizontal Placement Recommendation Vertical Placement Recommendation Playback Check Mode Vertical MID-FIELD Plugging the Ports to Adjust for Room Acoustics Speaker Installation Grounding AC Power CableUSE Clean Power ConnectionsInput Connections Power SwitchSetting the Input Level Control 85.0 Avoiding Damage About Surround Sound Surround SoundCenter Speakers in Music Mixes Placement of the Center M1 Active MK2 Speaker in the Studio Recommended positioning of surround speakers Placement of Rear SurroundsSurround Sound Wall Mounting Surround Sound Surround Sound Troubleshooting Index TroubleshootingObtaining Repair Service MaintenanceCleaning ServiceCustomers outside the USA and Canada Transducers SpecificationsEnclosure General Crossover SectionAmplifier Section Acoustic SectionLine IndexPlease Send in Your Warranty Card Alesis Limited WarrantyM1 Active Reference Manual

M1 Active Mk2 specifications

The Alesis M1 Active Mk2 is a well-regarded studio monitor designed for musicians, producers, and audio engineers seeking high-quality sound reproduction at an accessible price point. With a focus on delivering accurate sound and a balanced performance, the M1 Active Mk2 has become a popular choice for both home studios and professional environments.

One of the standout features of the M1 Active Mk2 is its bi-amplified design. Each speaker is powered by dedicated amplifiers that optimize the performance of the woofer and tweeter separately. This bi-amplification ensures clear and precise sound reproduction across the frequency spectrum. The 6.5-inch low-frequency driver is designed to deliver robust bass response while the 1-inch silk dome tweeter provides smooth high-frequency performance, resulting in a well-rounded audio experience.

The M1 Active Mk2 incorporates advanced technologies to enhance its performance. The monitor features a front-firing bass port that helps to minimize boundary coupling and improves the overall bass response, allowing for placement flexibility within the studio. This design reduces the risk of unwanted resonances caused by proximity to walls, ensuring accurate sound even in challenging acoustic environments.

Another important characteristic of the M1 Active Mk2 is its frequency response, which ranges from 55 Hz to 20 kHz. This wide frequency range makes it suitable for various musical genres and audio applications, enabling users to hear detailed nuances in their mixes. Additionally, the monitor is equipped with a rear-mounted EQ control, allowing users to tailor the sound to their specific acoustic space, mitigating the effects of room acoustics on playback.

Durability and design are also key aspects of the M1 Active Mk2. Its rugged enclosure is built to withstand the rigors of studio use while also providing a sleek and professional appearance. The monitors can be easily positioned on desktop surfaces or mounted on stands, making them versatile for different studio setups.

Overall, the Alesis M1 Active Mk2 stands out as a reliable and affordable option for anyone looking to improve their audio monitoring capabilities. With its bi-amplified design, advanced technologies, and customizable features, this studio monitor delivers impressive sound quality suitable for both amateur and professional recording applications. Whether mixing, mastering, or simply enjoying music, the M1 Active Mk2 is designed to deliver a true-to-source listening experience.
Top Page Image Contents