AOC 712SI Front Panel Control, ∙ Power Button, ∙ Power Indicator, ∙ Menu / Enter

Page 10

FRONT PANEL CONTROL

Power Button:

Press this button to turn the monitor ON or OFF.

Power Indicator:

Blue

￿

Power On mode.

Orange

￿

Off mode.

MENU / ENTER :

Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Brightness /Contrast Adjust OSD status.

Brightness :

Adjust brightness or function adjust.

Contrast :

Adjust contrast or function adjust.

Auto Adjust button / Exit:

1.When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).

2.When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.

The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.

OSD Lock Function:To lock the OSD, press and hold the MENU button

while the monitor is off and then press power button to turn the monitor To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.

NOTES

Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or exce dust or mechanical vibration or shock.

Save the original shipping carton and packing materials, as they wil come in handy if you ever have to ship your monitor.

For maximum protection, repackage your monitor as it was originally packed at the factory.

To keep the monitor looking new, periodically clean it with a soft cl Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

9

Image 10
Contents Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Checking the Contents of the Package Before YOU Operate the Monitor FeaturesSpecial Notes on LCD Monitors Power Cord Installation Instructions Swivel BasePower Source Page Controls and Connectors Video Cable Connecting Cables AC Power Cord Sub CableAdjusting the Viewing Angle External Controls General InstructionsMenu / Enter ∙ Auto Adjust button / Exit ∙ Power Button∙ Power Indicator Front Panel ControlHOW to Adjust a Setting OSD MessageAdjusting the Picture EepromOSD Plug & Play DDC2B Feature Plug and PlayGreen Technical Support FAQLock LED BlueError Message & Possible Solution Cable not Connected Input not SupportedSpecifications Vesa DDC2B TMMenu Preset Display Modes Standard Resolution Horizontal Vertical FrequencyTXD Connector PIN AssignmentPIN no Description RXD