Doors /REAR Deck

Coaxial Speaker Owner’s Manual

BASIC INSTALLATION Selecting the placement of your new Ti Coaxial speakers could be as easy as using the existing factory locations or may require you to create a new location. Speaker placement in the door, dash, or rear deck is the most common. See your local Phoenix Gold Dealer for additional location and mounting assistance.

1.Many vehicles already have factory locations (Figure 1) to house the “DROP IN” feature of the Ti Coaxial speakers. If no existing locations are available or are not used, check the desired location for adequate cutout area and any depth obstructions. Make sure to allow sufficient clearance for window tracks, structural braces, trunk lid springs, etc.

2.Assuming enough area and depth is available, use the provided template and trace the speaker cutout and mounting holes onto the surface of the mounting location.

3.If the mounting surface is not structurally strong enough to accommodate screws, (i.e. plastic, cardboard) use the pro vided speed clips which will act as a nut for the supplied screws.

4.Always provide water protection, if not supplied in the vehicle. We suggest using a rain shield or equivalent. If in doubt, please contact your Phoenix Gold Dealer.

Figure 1

Mounting the speaker in a factory location.

SPEAKER INSTALLATION WITHOUT GRILL

Phoenix Gold has provided a foam mounting gasket. When installing your new component speakers in a factory location make sure to use the foam mounting gasket as shown in figure 1. For reverse mounted speakers place the foam gasket in front of the speaker. This will ensure an air tight seal for your Ti speakers.

For more custom applications, or cases where the factory grill will not be used, a high excursion protective grill has been provided. When installing your new component speakers with the provided Ti grill use figure 2. Make sure to use the rubber gasket to get an air tight seal.

Figure 2

Mounting the speaker in a custom application.

SPECIFICATIONS: Due to continual product improvement, all specifications subject to change without notice.

T/S Parameters	Ti5CX	Ti57CX	Ti6CX	Ti65CX	Ti69CX

RMS Power Handling (watts)	60W	75W	75W	75W	90W

Peak Power Handling (watts)	120W	150W	150W	150W	180W

Impedance (ohms)	4	4	4	4	4

Cut Out Dimension (mm) / in.	(118) 4.5	(129 x 183) 7.2 x 5	(131) 4.9	(145) 5.6	(154 x 222) 8.6 x 6.1

Mounting Depth (mm) / in.	(61) 2.4	(65) 2.6	(65) 2.55	(73) 2.9	(83) 3.3

TI65CX, TI5CX, TI57CX, TI69CX, TI6CX specifications

AAMP of America is a prominent name in the automotive accessory industry, known for providing high-quality products that enhance the audio experience in vehicles. Among its offerings, the TI series components - specifically the TI5CX, TI69CX, TI57CX, TI6CX, and TI65CX models - stand out for their impressive features and advanced technologies.

The TI5CX is a 5.25-inch two-way coaxial speaker designed to deliver exceptional sound clarity. It features a polypropylene cone that is robust and lightweight, ensuring optimal sound performance. The tweeter is integrated to provide a smooth frequency response, delivering highs that are crisp and clear, even at higher volumes.

Next in line is the TI69CX, which houses a 6x9-inch design that brings powerful bass and expansive sound staging. It incorporates a unique voice coil design that enhances heat dissipation and ensures longevity. The rubber surround allows for greater excursion, leading to deeper bass and a fuller sound spectrum.

The TI57CX is a 5x7-inch full-range speaker that excels in delivering balanced sound. This model is designed for users who appreciate versatility and clarity. With its injection-molded cone and controlled sound dispersion, users can expect a well-rounded audio output, making it suitable for various music genres.

The TI6CX, with its 6.5-inch size, offers an ideal blend of power and precision. It features a high-temperature voice coil and a specially designed silk dome tweeter, allowing it to handle high power levels while producing low distortion. This model is perfect for car enthusiasts who wish to upgrade their factory sound systems.

Lastly, the TI65CX extends the versatility of the series with its 6.5-inch coaxial design. It features a stamped steel basket for added strength and stability. The neodymium magnet ensures efficient performance, while the rubber surround contributes to a longer lifespan and improved sound quality.

All models in the TI series are engineered with AAMP of America’s commitment to quality. These speakers incorporate advanced materials and innovative designs that not only enhance audio performance but also ensure durability. The combination of user-friendly installation features and competitive pricing makes the TI series an attractive option for both audio professionals and everyday users looking to upgrade their automotive sound systems. Whether for robust bass or crystal-clear highs, the TI5CX, TI69CX, TI57CX, TI6CX, and TI65CX bring a new dimension to in-car audio enjoyment. Each speaker is crafted to enhance the overall listening experience, making them a popular choice among audiophiles and casual listeners alike.