AOC 2218PH user manual Precautions

Page 3

PRECAUTIONS

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool basement.

Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a pers damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instru

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable

 

monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not plac

 

bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do

a bookcase or cabinet unless proper ventilation is provided.

The monitor should be operated only from the type of power source indicated on the label. If you are not s

power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug

 

grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have a

the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will

damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire o

spill liquids on the monitor.

Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous vol

hazards. Please refer all servicing to qualified service personnel.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate con

marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc)UL,CSAwhichlistedhave license(Only for monitors with pow

adapter).

Please make sure to clean the cabinet regularly with the provided cloth , you can use soft-cleanser to cl

of severe spray cleanser which will cauterize the monitor cabinet.

Dont leak liquid into monitor which will result in the damage of chassis or component. Please unplug befor

 

not scratch the screen with hard things.

Image 3
Contents About This Guide Safety Lamp Disposal Precautions Please setup or remove the base following below steps Turn on your monitor and computer Cable Connections On Back of Monitor and Computer PowerHdmi Connect the other end to the computer¡fls Hdmi portAttaching Wall Mounting Arm Setting the Optimal Resolution What is DCB? Page Page DCR Adjustment Page DCR Installation ForDDC-CI DCR Noise Noise Phase 100Cool Normal Recall Normal Color Temperature from PresetSRGB Recall Srgb Color Temperature from EepromPage Page Setting Extra Help Vesa DDC2B/CI TTLGND-R ResolutionHorizontal Vertical WSXGA+CEC SCLSDA