AOC 2218PH user manual Cable Connections On Back of Monitor and Computer Power, Hdmi

Page 5

Cable Connections On Back of Monitor and Computer

1.Power

2.HDMI

3.Analog

4.Audio

5.Earphone

Turn off your computer before performing the procedure below.

1.Connect the power cable to the AC port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the comp port.

3.(Optional ¤C Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the

 

connect the other end to the computer¡fls HDMI port.

4.

Connect the audio cable to audio in port on the back of the monitor

5.

Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does notTroubleshootidisplay an.ngimage, see

Page 4 Page 6
Image 5
Page 4 Page 6
Contents About This Guide Safety Lamp Disposal Precautions Please setup or remove the base following below steps Hdmi Cable Connections On Back of Monitor and Computer PowerConnect the other end to the computer¡fls Hdmi port Turn on your monitor and computerAttaching Wall Mounting Arm Setting the Optimal Resolution What is DCB? Page Page DCR Adjustment Page DCR DDC-CI InstallationFor DCR Noise Noise Phase 100SRGB Recall Srgb Color Temperature from Normal Recall Normal Color Temperature from PresetEeprom CoolPage Page Setting Extra Help Vesa DDC2B/CI TTLHorizontal Vertical ResolutionWSXGA+ GND-RSDA CECSCL
Top Page Image Contents