AOC 2218PH user manual Please setup or remove the base following below steps

Page 4

Setup the stand and base

Please setup or remove the base following below steps.

Adjusting Viewing Angle

∙For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s preference.

∙Hold the stand so you do not topple the monitor when you change the monitor’s angle.

∙You are able to adjust the monitor’s angle from -5to 30 .

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Attaching the Cables

Image 4

Contents About This Guide Safety Lamp Disposal Precautions Please setup or remove the base following below steps Cable Connections On Back of Monitor and Computer Power HdmiConnect the other end to the computer¡ﬂs Hdmi port Turn on your monitor and computerAttaching Wall Mounting Arm Setting the Optimal Resolution What is DCB? Page Page DCR Adjustment Page DCR For InstallationDDC-CI DCR Noise Phase 100 NoiseNormal Recall Normal Color Temperature from Preset SRGB Recall Srgb Color Temperature fromEeprom CoolPage Page Setting Extra Help TTL Vesa DDC2B/CIResolution Horizontal VerticalWSXGA+ GND-RSCL CECSDA