Asoka™ PlugLink™ PL Cable/DSL Router Manual
Windows 98 SE/ME
1)In the Start Menu, select ‘Settings’
2)Double click on the ‘Network’ icon.
3)Select the TCP/IP entry for the Ethernet adapter or Powerline adapter used to con- nect to the router.
4)Click ‘Properties.’
5)Select the ‘IP Address’ tab.
6)Select ‘Obtain an IP Address Automatically’ if not already selected.
7)If the computer was previously con- nected to the Internet, it may have an old gateway setting. Remove the gateway setting by clicking on the ‘Gateway’ tab and remove any IP addresses.
8)Click ‘OK’ to close the TCP/IP properties panel.
9)Click ‘OK’ to close the Network panel. The changes will take effect when this panel is closed.
9