Asoka PL9920-BBR specifications LAN Side Setup Guide

Page 9

Asoka™ PlugLink™ PL Cable/DSL Router Manual

LAN Side and WAN Side

The router creates a divider between the Internet (WAN side) and your computers on the Local Area Network (LAN side). The router uses a Firewall to protect the computers on your LAN from all other computers

connected to the Internet.

LAN Side Setup Guide

There are two parts of the software setup, first to get all equipment on the LAN working with the router and then to get the router to connect to the Internet. The connection of a local computer to the router is required first, so that will be the first step.

The setup will be simplest if automatic IP address assignment (DHCP) is used. To find out if DHCP is enabled, follow these steps depending on oper- ating system:

8

Image 9
Contents User’s Manual Table of Contents Introduction Important Safety Information Getting Intimate with your Powerline Device Getting Started Connecting the Asoka PlugLink PL Cable/DSL Router Asoka PlugLink PL Cable/DSL Router Manual LAN Side Setup Guide Asoka PlugLink PL Cable/DSL Router Manual Asoka PlugLink PL Cable/DSL Router Manual Router Setup Guide Asoka PlugLink PL Cable/DSL Router Manual Internet Connection WAN Side Setup Guide Asoka PlugLink PL Cable/DSL Router Manual Asoka PlugLink PL Cable/DSL Router Manual Asoka PlugLink PL Cable/DSL Router Manual Asoka PlugLink PL Cable/DSL Router Manual Powerline Encryption Setup Guide Advanced Features Checking the Internet Service Provider SetupAsoka PlugLink PL Cable/DSL Router Manual Router LAN Setup Guide Advanced Tab Setup Guide Troubleshooting Guide Computers can not access the router setup screen RDY LED is flashing rapidly or not at all LAN I/F Appendix a SpecificationsDhcp Appendix B GlossaryAsoka USA Corporation Appendix C Technical Support and RMAAppendix D FCC Statement Appendix E Limited Warranty Asoka PlugLink PL Cable/DSL Router Manual Asoka PlugLink PL Cable/DSL Router Manual Making Connectivity a Reality