Installing the PlugLink 9650 Ethernet Adapter

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

Chapter 5

Installing the PlugLink 9650 Ethernet Adapter

Note: Do not connect the PlugLink 9650 Ethernet Adapter into a power strip, extension cord, uninterruptible power supply (UPS), or surge protector. This may prevent the unit from working properly or degrade the network performance.

1.Connect each of your PlugLink 9650 Ethernet Adapters.

a)Connect the unit into a nearby wall outlet

b)Connect the enclosed Ethernet cable to the Ethernet port of the unit

c)Connect the other end of the cable to the Ethernet port of the PC

2.Insert the enclosed Installation Resource CD into your CD-ROM drive. The PlugLink 9650 Ethernet Adapter Installation Utility should appear automatically. If it does not appear within 30 seconds, select your CD-ROM drive and double-click on the icon named “Setup.exe” to initiate the Installation Utility.

3.The Welcome screen should appear. Click on “Install Driver and Utility” to proceed to installation.

Figure: 5-1: Welcome screen.

4. Click “Next” to begin the installation process.

Page 9 of 26