Philips SC280 manual BBottle heater, CFood steamer, Installation, Operation, Temperatures overview

SBC_SC280.qxd 13-07-2004 10:37 Pagina 6

6ENGLISH

B)Bottle heater

10 Base with heating element

Heats up the water.

12Handle

13Cover

14Lid

C)Food steamer

10 Base with heating element

Heats up the water.

15Handle

16Steaming bowl

Installation

1 Before connecting the Philips 3-in-1 Steaming Centre to the mains, check that the mains supply is 220-240V AC.

2 Place the Steaming Centre out of reach of children and on a dry, non-slip, horizontal surface.

3 Unreel the required length of cable from the cable holder (8) and plug the appliance into the mains.

>The indicator LED (9) will light up green.The Steaming Centre is now in Standby mode but is not actually heating. Heating is only activated when the Control knob (7) is pressed and the desired heating function is selected.

Operation

Temperatures overview

Babies usually like their milk and food to be at a temperature of 37ºC. The Control knob (7) enables you to set the correct food temperature. The setting depends on the amount, consistency, and current temperature of the milk or food.

	20ºC/10ºC	20 ml
	20ºC	20 ml
Heating
	20ºC	20 ml
	10ºC	20 ml
	10ºC	20 ml
Sterilizing		50 ml
	• 15
Steaming	• 20	200 ml
	• 25
	• 30

- refrigerator temperature (approx. 10 °C.)

- room temperature (approx. 20 °C.) - up to 200 ml. bottle content

- up to 50 ml. bottle content

Note: If all the water evaporates before heating is completed, the 3-in-1 Steaming Centre will start to beep and the indicator LED (9) will start flashing red. If this happens, press the Control knob (7) to interrupt the heating process and fill the water reservoir (5).