Philips SC280 manual Maintenance, Cleaning, Solving problems, English, ProblemSolution

SBC_SC280.qxd 13-07-2004 10:37 Pagina 10

10ENGLISH

> When the set defrosting time has been reached, you will hear three beeps and the indicator LED (9) will turn green.

4Remove the cover from the steaming bowl (16), take the steaming bowl off the base (10), and unplug the mains cable.

Maintenance

Cleaning

•Always unplug the 3-in-1 Steaming Centre from the mains and allow it to cool down before cleaning it.

•All parts of the 3-in-1 Steaming Centre except the base (10) can be washed in a dishwasher.

•Do not immerse the base (10), cable (6), or plug in water or any other liquid. Clean the base (10) with a damp cloth.

•Do not use cleaning or scouring agents.

•Limescale (hard water deposits) should be removed.To do this, pour a solution of 1 part of vinegar in 4 parts of water (a total of about 60 ml) into the base (10), the container (3), or the steaming bowl (16).Wait until the limescale has dissolved completely.Then rinse out well and wipe with a damp cloth.

Solving problems

If a fault occurs, first check the points below. If you are unable to solve the problem by following these hints, please contact the helpline or consult your dealer. Under no circumstances should you try to repair the 3-in-1 Steaming Centre yourself; doing so will invalidate the guarantee.

ProblemSolution

Indicator LED does not light Check whether the mains cable is properly connected.

The 3-in-1 Steaming Centre starts beeping and the indicator LED (9) starts flashing red

Press the Control knob (7) to interrupt the heating process, check the water level in the water reservoir (5), and refill if necessary.

Water overflows	Decrease the water level in the water
	reservoir (5).
Temperature of milk too low	Leave the bottle in the container for a few
	seconds longer or turn the Control knob (7)
	a few bars to the right.
Temperature of milk too high	Turn the Control knob (7) a few bars to the
	left.