Philips SC280 manual Sterilizing, English, Do not lift the cover 13 during heating

SBC_SC280.qxd 13-07-2004 10:37 Pagina 8

8ENGLISH

4 x 6 x

15

20

25

30

Notes:

–Do not lift the cover (13) during heating.

–To distribute the heat better, stir the contents of the jar after heating it.

–Always check that the contents of the jar are at the correct temperature by testing some on the back of your hand.

Keeping bottles and jars warm

You can also use the 3-in-1 Steaming Centre to keep bottles and jars warm for a short time. After heating it up, simply place the bottle or jar on the protective grid (4) in the base (10) and place the cover (13) on the base. The cover will retain the heat and keep the bottle or jar warm for a time. For microbiological and hygienic reasons, baby food should never be kept warm for longer than one hour.

Sterilizing

With the container (3), you can use the 3-in-1 Steaming Centre to sterilize bottles and small objects like rubber teats and small toys.The Steaming Centre disinfects the objects completely by destroying all harmful bacteria.

Notes:

–This sterilizer does not sterilize up to clinical standards.

–Before sterilizing, bottles and objects should first be cleaned.

1Using the measuring cup (11), pour 50 ml of water into the water reservoir (5).

2Place the container (3) on the base (10).

3Place the bottles in the container (upside down).

The container can contain four wide-neck bottles or six regular-sized bottles. Click the bottles into the projections at the bottom of the container.

4Place small objects in the basket (2) and place the basket in the container.

5Place the lid (1) on the container.

6Press and turn the Control knob (7) to .

>The indicator LED will light up red and you will hear a beep to indicate that sterilizing has started.

>After about 15 minutes you will hear three beeps.The indicator LED (9) will flash three times and then turn green. Sterilizing has now finished.

7Remove the bottles or objects from the container and unplug the mains cable.