Conceptronic C300BRS4 | User Manual |
5.Choose the desired Connect mode select setting. Select from: Always on, Manual, or Connect on demand. Most users will want to choose the default connection setting, Always on.
6.When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.
7.The new settings must be saved and the Router must be restarted for the settings to go into effect. To save and reboot the Router, click on the Tools directory tab and then click the System button. In the System Settings window, click the Save button under Save Settings to Local Hard Drive and then click the Reboot button under Reboot the CONCEPTRONIC C300BRS4.
8.The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection.
Additional settings for PPPoE/PPPoA connections:
PPPoE/PPPoA Parameters | Description |
User Name | For PPP connections, a User Name and Password are used to identify |
| and verify your account to the ISP. Enter the User Name for your ADSL |
| service account. User names and passwords are |
| enter this information exactly as given to you by your ISP. |
Password | Together with the User Name, this is used to verify your account to |
| the ISP. Enter the Password exactly as given to you by your ISP. |
MTU | The Maximum Transmission Unit size may be changed if you want to |
| optimize efficiency for uploading data through the WAN interface. The |
| default setting (1492 bytes) should be suitable for most users. Some |
| user may want to adjust the setting to optimize performance for |
| wireless traffic or when low latency is desired (such as with Internet |
| gaming). It is highly recommended that the user research how |
| adjusting the MTU may affect network traffic for better or worse. |
IP Address | If you have selected the Static PPPoE option, type in the global IP |
| address used for your WAN interface. Your ISP should provide this IP |
| address to you. |
MAC Address | To use the Clone MAC Address feature, enter a MAC address in this |
| field and then click the Clone MAC Address button. |
Primary DNS | Enter the Primary DNS Address. This information should be provided to |
| you by your Internet Service Provider. |
Maximum Idle Time | A value of 0 means that the PPP connection will remain connected. If |
| your network account is billed according to the amount of time the |
| Router is actually connected to the Internet, enter an appropriate Idle |
| Time value (in minutes). This will disconnect the Router after the |
| WAN connection has been idle for the amount of time specified. |
38