| Conceptronic C300BRS4 | User Manual |
|
| PPTP Parameters | Description | |
|
|
| |
| IP Address | Enter the IP address for your Router based on the information | |
|
| provided to you by your ISP. | |
| Subnet Mask | Enter the Subnet Mask for your Router based on the information | |
|
| provided to you by your ISP. | |
| ISP Gateway Address | Enter the Gateway IP address based on the information provided to | |
|
| you by your ISP. | |
| DNS | Enter the Domain Name Server IP address. | |
| Server IP | Enter the IP address of the ISP server with which your router will be | |
|
| conveying encrypted information. This field is based on information | |
|
| provided to you by your ISP. | |
| Username | Enter the name of the PPTP account as provided to you by your ISP. | |
| Password | Enter the PPTP password as provided to you by your ISP. | |
| Retype Password | Retype the password entered in the Password field. | |
| Maximum Idle Time | A value of 0 means that the PPP connection will remain connected. If | |
|
| your network account is billed according to the amount of time the | |
|
| Router is actually connected to the Internet, enter an appropriate Idle | |
|
| Time value (in minutes). This will disconnect the Router after the | |
|
| WAN connection has been idle for the amount of time specified. | |
| MTU | The Maximum Transmission Unit size may be changed if you want to | |
|
| optimize efficiency for uploading data through the WAN interface. | |
|
| The default setting (1400 bytes) should be suitable for most users. | |
|
| Some user may want to adjust the setting to optimize performance for | |
|
| wireless traffic or when low latency is desired (such as with Internet | |
|
| gaming). It is highly recommended that the user research how | |
|
| adjusting the MTU may affect network traffic for better or worse. | |
| Connect mode select | Select the desired option: Always on, Manual, or Connect on demand. | |
|
| Most users will want to choose the default connection setting, Always | |
|
| on. | |
41