Conceptronic C300BRS4 user manual Front Panel LED Display

Page 7

Conceptronic C300BRS4

User Manual

Front Panel LED Display

Place the Router in a location where the LED indicators on the front panel can be viewed.

The LED indicators on the front panel include the Power, Status, WAN, WLAN and WPS indicators. Each Ethernet LAN port displays an indicator for monitoring link status and activity (Link/Act).

 

7

6

5

4

3

2

1

Nr

Description

Status

Status Explanation

 

 

 

 

 

 

 

 

 

1

Power LED

OFF

The device is turned off

 

 

 

 

ON

The device is turned on

 

 

2

Status LED

OFF

The device is turned off / System Failure*

 

 

BLINK

The device is turned on and ready for use

3

WAN LED

OFF

No WAN Connection is created

 

 

ON - STEADY

A WAN Connection is created

 

 

 

ON - BLINK

Data is sent or received through the WAN Port

4

WLAN LED

OFF

Wireless interface is disabled

 

 

 

BLINK

Wireless interface enabled and active

5

LAN LED’s

OFF

No Network Link is created to the LAN Port

 

(1,2,3,4)

ON - STEADY

A Network Link is created on the LAN Port

 

 

ON - BLINK

Data is sent or received through the LAN Port

6

WPS LED

ON – BLINK

When the WPS Button is pressed, the WPS LED will

 

 

 

blink for 120 seconds while searching for WPS

7

 

 

Clients. **

 

 

 

 

WPS Button

Press the WPS Button to activate the WPS feature. The router will

 

 

search for WS Clients for 120 seconds. **

 

 

 

 

 

 

 

 

 

 

 

*In normal use, the Status LED will turn on and blink within 45 seconds after the device is turned on or restarted. When a system failure happens with the device, the Status LED will not turn on.

You can use the following options to solve the system failure:

a.Power down the device, wait 10 seconds and reconnect the power to the device.

b.Reset the device to factory defaults by pressing the reset button on the back of the device for +/- 15 seconds.

If the Status LED does not turn on after you tried above options, please contact Conceptronic Support at: support@conceptronic.net

**For more information about the WPS feature, see the chapter ‘Configuring Router Settings’ of this Manual.

7

Image 7
Contents Conceptronic C300BRS4 About This Manual Installation OverviewBefore You Start Web Browser Requirements for InstallationWlan Ethernet Adapter Operating SystemPacking List Wireless LAN Range Radio TransmissionSsid Front Panel LED Display Description Explanation Rear Panel Cable ConnectionsBuilding Materials make a difference Hardware InstallationWireless LAN Performance and Environment Keep the number of walls and ceilings to a minimumPosition antenna for best reception LAN / Wireless LAN ConnectionFor Wireless Users WAN ConnectionPage Configure your IP address Computer ConfigurationPage Checking your connection with the C300BRS4 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1IP Address Page Configuring Router Settings Device Settings Overview Home Wizard Setup Wizard windowConnection Static IP Connection Dynamic IP Connection PPPoE Connection L2TP Connection PptpPage When all Wireless settings are made, click Next to continue Page Wireless Settings window Home WirelessWEP Encryption Wireless Settings window for WEPWPA Encryption Wireless Settings window for WPA and WPA2WPA/WPA2 Encryption with Radius Server WPA/WPA2-PSK With Passphrase Encryption WPS Security C300BRS4 WPS Wizard WPS Pin Code technologyPage Home WAN WAN Bridge or Router ModeStatic IP Address WAN Settings window for Static IP AddressMTU Dynamic IP Address WAN Settings window for Dynamic IP AddressClone MAC Address Dynamic IP Parameters Description Host NameMAC Address button Clone MAC Address buttonPPPoE WAN Settings window for PPPoEMaximum Idle Time PasswordPPPoE/PPPoA Parameters Description User Name Primary DNSConnect mode select Pptp WAN Settings window for Others PptpServer IP Retype PasswordPptp Parameters Description IP Address DNSL2TP WAN Settings window for Others L2TPL2TP Parameters Description IP Address Home LAN LAN Settings windowDhcp window Home DhcpUse the Router for Dhcp Disable the Dhcp ServerSmtp Mail Server Outgoing 5900 Menu AdvancedAdvanced Virtual Server VNCVirtual Server window Special Application window Advanced ApplicationsFirewall Rules window Advanced FirewallDMZ window Advanced DMZIP Filters window Advanced IP FiltersMAC Filters window Advanced MAC FiltersURL Blocking window Advanced URL BlockingDomain Blocking window Advanced Domain BlockingAdvanced Performance Dynamic DNS window Advanced DdnsOption Description Server Address Administrator Settings window Tools AdminMenu „Tools Time window Tools TimeSchedule window Tools ScheduleTools System System Settings windowTools Firmware Firmware Upgrade windowBlock WAN Ping SPI modeTools Misc Ping Test windowVPN Pass-Through UPnP SettingsStatus LOG Menu StatusView Log window Traffic Statistics window Status Wireless ClientsConnected Wireless Client List window Status StatisticsTechnical Specifications Radio and Modulation Type TemperatureDimensions WeightLicensing Information Licence AgreementAvailability of source code Version 2, June Licence Agreement GNU General Public LicenseLicence Agreement Licence Agreement Licence Agreement Licence Agreement Complies with following directives Declaration of CE Confirmity