Configuration
Mode
Disabled
Description
The MAC Address filter is disabled - all clients can access your net- work.
Accept
Only wireless clients at the specified MAC Addresses can access your network. No other wireless clients can connect to your access point
Reject
Wireless clients at the specified MAC addresses are blocked from ac- cessing your network. Any and all other wireless clients can connect.
If you select the Accept or Reject mode, enter the MAC addresses you wish to allow or block. Each MAC address has to be entered as a 12 hexadecimal number without any delimiters (no commas, colons, spaces, etc.).
After setting up the MAC Address Filter, please click on Apply and close the window.
3.2.8 Bridge Adapter
In access point mode, you may want to provide additional connection possibilities
for the wireless clients. Because the Corinex Wireless G USB Mini Adapter doesn’t 30 have an Ethernet port, and is connected directly to your PC, you may want to set up bridging between the wireless connection and some other network card.
For example, if your computer has an Ethernet connection providing Internet to your PC, you can bridge the wireless connection with your Ethernet card, so that wireless clients will get access to your Internet connection. In order to do this, se- lect your Ethernet card from the list of network adapters, as shown in the example below.
The wireless clients will get full access to your Internet connection, they can use the services provided by DHCP servers in the wired network, and will gain access to shared resources and devices, such as network printers.