Corinex Global ETS 300-826 manual Mode Description, Station, Connect the computer to a network

Page 16

Configuration

In the top right corner of the window, you can see the current operation mode of the Corinex Wireless G USB Mini Adapter. Both modes are described in the table below.

Mode	Description

Station	The Corinex Wireless G USB Mini Adapter works as a wireless
	client. It has to be connected to an access point in order to
	connect the computer to a network.

Access Point	The Corinex Wireless G USB Mini Adapter works as an access
	point and provides networking services for wireless clients.
	In this mode, you can bridge the wireless network with an-
	other network, for example with your Ethernet connection,
	so that the wireless clients are able to access the network.

The configuration options and the look of the configuration utility depend on the operating mode. Please see the next chapters for detailed information on both modes.

3.1 Station Mode

13

By default, the Corinex Wireless G USB Mini Adapter comes in the station mode and tries to find a wireless access point. It scans all channels for a response. As soon as it finds an access point, it displays its SSID and signal strength in the table Available Networks.

You can scan for all available access points by clicking on the Refresh button. The Corinex Wireless G USB Mini Adapter scans all available channels and reports the re- sults in the Available Networks window.

Corinex Wireless G USB Mini Adapter

Image 16

Contents Corinex 0560 FCC ID PANWL2203 Corinex Wireless G USB Mini Adapter CopyrightEnd User License Agreement Corinex Communications CorporationEnd User License Agreement Quick Start Quick StartQuick Start Quick Start Contents Introduction OverviewUsing the Corinex Wireless G USB Mini Adapter Using the Corinex Wireless G USB Mini AdapterStep Using the Corinex Wireless G USB Mini Adapter Step Configuration ConfigurationMode Description Access PointStation Connect the computer to a networkMAC address of the access point Field DescriptionShared items on a network, and printers Ad-Hoc the clients communicate with each other directlyHoc Network Options button. The following window will appearField GeneralChannel Infrastructure mode Ad-hoc modeConfiguration Encryption Options SettingWEP Encryption Key Key LengthKey Length Length in Ascii formatWPA Encryption Connect InformationProtocol Pre-Shared KeyCertificate ProfileUser Interface Configuration OtherCountry Roaming Power consumption mode Channel Center Regulatory Domains IdentifierNorth MHz Israel FranceDefault value of the threshold is 2346 bytes Configuration Fragmentation ThresholdRTS / CTS Threshold Configuration Information Dow will show the basic information as followsGeneral Connection Settings Setting DescriptionConnect to this access point PointThis is the identification of your wireless access point Hide SsidPoint to the world, click this checkbox 2 WEPAuthentication Mode Key Length Length in hexa Decimal format Ascii format64-bit 128-bit 256-bit Open System5 RTS/CTS Configuration Preamble MAC Address FilterDisabled ModeReject Bridge AdapterTroubleshooting TroubleshootingProblem SolutionGlossary Glossary IGateway InfrastructureISM Band Local Area Network LANWi-Fi Alliance Simple Network Management Protocol SnmpStatic IP Addressing Temporal Key Integrity Protocol TkipGlossary Wi-Fi Protected Access WPA Wired Equivalent Privacy WEPWireless LAN Wlan Wide Area Network WAN