Corinex Global ETS 300-826, ETS 300-328 manual Troubleshooting, Problem, Solution

Page 34

Troubleshooting

4Troubleshooting

Problem

The computer doesn’t recog- nize the Corinex Wireless G USB Mini Adapter.

Solution

Make sure the drivers have been installed from the CD. Please refer to this user guide in order to successfully install the Corinex Wireless G USB Mini Adapter with your system.

The LED on the Corinex Wire-	Make sure the Corinex Wireless G USB Mini
less G USB Mini Adapter is off.	Adapter is inserted properly into the USB port
	of your PC and that the drivers are correctly in-
	stalled.
The LED is always on, not	Make sure the drivers have been installed from
blinking.	the CD.
The LED is blinking but the	Make sure the Configuration Utility has been
Corinex Wireless G USB Mini	installed from the CD.
Adapter icon does not appear
in the system tray.

I’m seeing very poor network	Try selecting another channel for communica-
performance.	tions or moving your device physically closer to
	the Access Point.

31

I cannot connect to an access point.

Make sure that you have set the network type to Infrastructure mode, you have the correct SSID, exactly the same as the SSID at the access point. If encryption is on at the access point, set the same password and other options on your Corinex Wireless G USB Mini Adapter.

	I can connect to the access	Please check to see if encryption is on at the ac-
	point, but not to the Internet.	cess point. Set your Corinex Wireless G USB Mini
		Adapter encryption settings exactly the same as
		those at the access point.
	I cannot connect directly to an-	Make sure you have set your Corinex Wireless G
	other wireless device.	USB Mini Adapter to Ad-Hocmode and that you
		have correct SSID and other settings.

Corinex Wireless G USB Mini Adapter

Image 34

Contents Corinex 0560 FCC ID PANWL2203 Corinex Wireless G USB Mini Adapter CopyrightEnd User License Agreement Corinex Communications CorporationEnd User License Agreement Quick Start Quick StartQuick Start Quick Start Contents Introduction OverviewUsing the Corinex Wireless G USB Mini Adapter Using the Corinex Wireless G USB Mini AdapterStep Using the Corinex Wireless G USB Mini Adapter Step Configuration ConfigurationStation Mode DescriptionAccess Point Connect the computer to a networkShared items on a network, and printers MAC address of the access pointField Description Ad-Hoc the clients communicate with each other directlyHoc Network Options button. The following window will appearField GeneralChannel Infrastructure mode Ad-hoc modeWEP Encryption Key Configuration Encryption OptionsSetting Key LengthWPA Encryption Key LengthLength in Ascii format Connect InformationCertificate ProtocolPre-Shared Key ProfileUser Interface Configuration OtherCountry Roaming North MHz Power consumption modeChannel Center Regulatory Domains Identifier Israel FranceDefault value of the threshold is 2346 bytes Configuration Fragmentation ThresholdRTS / CTS Threshold Configuration Information Dow will show the basic information as followsConnect to this access point General Connection SettingsSetting Description PointPoint to the world, click this checkbox This is the identification of your wireless access pointHide Ssid 2 WEP64-bit 128-bit 256-bit Authentication ModeKey Length Length in hexa Decimal format Ascii format Open System5 RTS/CTS Configuration Preamble MAC Address FilterReject DisabledMode Bridge AdapterProblem TroubleshootingTroubleshooting SolutionGlossary ISM Band Glossary IGatewayInfrastructure Local Area Network LANStatic IP Addressing Wi-Fi AllianceSimple Network Management Protocol Snmp Temporal Key Integrity Protocol TkipWireless LAN Wlan Glossary Wi-Fi Protected Access WPAWired Equivalent Privacy WEP Wide Area Network WAN