
The DockLINK uses an RJ11 jack for connection to the terminal. Use of this port requires a special interface cable that connects between the Serial Port jack and a DB9F serial connector. The
Signal Description |
| RJ11 | Signal Description |
|
|
|
|
Ground | 2 | 1 | Ground |
Serial Out (from computer) | 3 | 2 | Rx In |
Serial In (to computer) | 5 | 4 | Tx out |
Table 2: Serial Port Adapter Cable Pin-outs
| Page 64 | © 1998 RadioLAN. |