
Setting up10BaseT Port Parameters
The 10BASET PORT PARAMETERS page displays the 10BaseT Network Interface Card port’s name, allows you to enable or disable the port and network filters, and allows you to examine the MAC Address filter. It is necessary for an entry in the Port Name field, but you need not change other entries on this page.
Entries on this page other than the Port Name field can disable communication with the Network Interface
Card: RadioLAN Recommends that you avoid making changes to items on this page.
Although unnecessary, if you have a particularly special application, you can edit other items on the screen. Filters that you can enable or disable are as follows:
∙MAC Address Filter
∙ Block IP Packets | Figure 19: 10BaseT Port Parameters Page |
∙Block IPX Packets
∙Block NetBEUI Packets
∙Block NetBIOS Packets
| Page 32 | © 1998 RadioLAN. |