Kenmore 153.31242 manual Thermostat Removal/Replacement, Element Cleaning/Replacement

Page 16

NOTE: If the water heater is going to be shut down and drained for an extended period, the drain valve should be left open with hose connected allowing water to terminate to an adequate drain.

6.Close the drain valve, refill the tank, and restart the heater as directed in this manual.

Improper installation and use may result in property damage.

•Fill tank with water before operation.

Never use this water heater unless it is completely full of water.

To prevent damage to the tank and heating element, the tank must be filled with water. Water must flow from the hot water

faucet before turning "ON" power.

Thermostat Removal/Replacement

•Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned "OFF".

•Failure to do this could result in death, serious bodily injury, or property damage.

1.Turn "OFF" the electrical power to the water heater at the junction box.

2.Remove the access panel, then fold the insulation back to expose the thermostat.

3.Lift out the tab as shown below to unctip the terminal cover from the thermostat. The terminal cover can now be removed from the thermostat.

LIFT OUT TAB TO

JACKET

 

 

 

UNCLIP TERMINAL

 

 

 

 

 

 

 

 

COVER FROM

 

 

PLASTIC

TABS

ON

TH ERMOSTAT

TERMINAL

COVER

 

 

 

 

BOTH SIDES

OF

 

CLIPPED

TO

 

TERMINAL

COVER

 

 

 

 

THIS POINT

HOL IT IN PLACE

 

 

 

 

 

 

 

BRACKET

 

 

LOWER

 

ELEMENT

 

 

 

THERMOSTAT

 

 

 

 

JACKET

FIGURE 29.

4.Disconnect wires from the thermostat.

5.Remove the thermostat from behind the thermostat bracket.

6.Place the new thermostat in the bracket making sure it fits firmly against the tank.

7.Attach the wires to the new thermostat.

NOTE: Some of the terminals may require straight-in wiring through an eye-opening. If wires are now looped, recut and strip wire 3/8" to a straight length and insert.

8.Put plastic terminal cover back in place.

9.Replace the insulation to cover the thermostat.

10.Replace access panel, then turn the electric power on.

Element Cleaning/Replacement

NOTE: These instructions are written for element cleaning and element replacement.

To remove the element from your tank in order to clean or replace it:

•Before removing any access panels or servicing the water heater, make sure the electrical

supply to the water heater is turned "OFF".

•Failure to do this could result in death, serious bodily injury, or property damage.

1.Before beginning, turn "OFF" the electric power supply to the water heater. After the power has been turned off, open a nearby hot water faucet until the water is no longer hot.

FIGURE 30.

2, Turn off the water supply to the water heater at the water Shut-off valve or water meter.

FIGURE 31.

3, Attach a hose to the water heater drain valve and put the

other end in a floor drain or outdoors. Open the water heater drain valve. Open a nearby hot water faucet which will relieve pressure in the water heater and speed draining.

FIGURE 32.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 0Qus Use & Care GuideTo avoid possible Injury or deathDeath or injury PotentiallyExplosion Hazard Improper installation and use may result in property damageFire Hazard / Electric Shock Hazard Year Limited Warranty on Water Heater Safe Installation USE and Service General ServiceItisstronglysuggestedthatthisnewwaterheaterbe BySearsauthorizedcontractorsMaterials Needed Additional Tools Needed When Sweat SolderingBasic Tools Removing the Old Water Heater MineralBuilduporSedimentMayAccumulate Facts to Consider About the LocationInsulation Blankets Water PipingHOTTERWATERCANSCALDWaterheatersareintended Valve and Pipe InsulationTemperature-Pressure Relief Valve BeremovedfromitsdesignatedopeningnorpluggedEfLever Explosion HazardFilling the Water Heater WiringProperty Damage Hazard Wiring Diagram Temperature Regulation Temperature SettingsThermostat Adjustments ThermostatsTemperature-Pressure Relief Valve Operation Anode Rod InspectionDraining and Flushing Burn hazardElement Cleaning/Replacement Thermostat Removal/ReplacementFill tank with water before operation ET,W =1t,i Fire Hazard Electric Shock HazardService Drain Valve Washer ReplacementContact Sears Repair Services at 1-800-4-MY-HOME Thermal Expansion Tank Specifications Expansion Tank Sizing ChartStart Up Conditions Operational ConditionsAIR in HOT Water Faucets Water is TOO HOT Improper installation and use may result in property damage Key Model No 153.312420For troubleshooting, product manuals and expert advice LE-FOYER MSU-HOGAR Call anytime, day or night U.S.A. and Canada

153.31242 specifications

The Kenmore 153.31242 is a reliable and efficient air conditioner that combines advanced technology with user-friendly features, making it a popular choice for many homeowners. This model is particularly recognized for its versatility in cooling, perfect for various room sizes and settings, ensuring that users can find optimal comfort at home.

One of the standout features of the Kenmore 153.31242 is its impressive cooling capacity. With a BTU rating suitable for medium to large rooms, it can effectively lower the temperature even on the hottest days. Its ability to quickly cool a space makes it ideal for summer months, allowing users to escape the heat without compromising comfort.

The unit employs a powerful compressor and a fan system designed to distribute air evenly throughout the room. This technology ensures consistent temperature control, eliminating hot spots that are common in less efficient models. Additionally, the air conditioner features multiple cooling speeds and a programmable timer, giving users the flexibility to customize their cooling preferences.

Energy efficiency is another critical characteristic of the Kenmore 153.31242. It is equipped with an Energy Efficiency Ratio (EER) that exceeds the minimum federal standards, consuming less power while effectively cooling the space. This efficiency not only reduces energy costs but also contributes to environmental sustainability, making it an eco-friendly choice.

Moreover, the Kenmore AC unit includes a user-friendly control panel with an easy-to-read display. This panel often incorporates remote control functionality, allowing users to adjust settings from the comfort of their couch or bed. Many models also offer compatibility with smart home systems, providing remote management via mobile devices.

The Kenmore 153.31242 is built with durable materials designed to withstand the test of time. Its robust design emphasizes low maintenance, with washable filters that keep the air clean and reduce allergens, enhancing indoor air quality.

In summary, the Kenmore 153.31242 stands out for its powerful cooling capabilities, energy efficiency, and user-centric features. Combining modern technology with practical functionality, this air conditioner is an excellent choice for anyone looking to maintain a comfortable living environment.
Top Page Image Contents