Keyspan:USB Serial Adapter for Mac OS
Keyspan serial port from the list of available ports (this is same port from Step 1).
Once you have selected the Keyspan serial port, click the OK button to save your changes. Please note that you may have to restart your emulated environment (ie Windows).
Configuration is now complete. You must now open your serial device's software and tell it to use COM1 or COM2 as per that device's instructions.
7.1.c.03.b - VirtualPC - Method 2
This method assumes that you have already done the following:
1.installed the VirtualPC software
2.installed your serial device's software in Windows (in VirtualPC)
3.connected your serial device hardware to a Keyspan serial port
4.uninstalled any Keyspan MAC software
5.installed the Keyspan serial port Windows software
6.installed the Keyspan serial device's hardware
If you have not performed any of the steps mentioned above, please do so before proceeding.
(continued on next page...)
This User Manual applies to the Keyspan USB Serial Adapter Software for Mac OS X.
Rev 05jul15 | Page 31 |