§Upon installation of the device driver, you will notice 3 icons appear on the “My Computer” screen. Refer the section on “Installing new hard disk on Win98SE / ME & configure new hard disk drive in Win98SE / ME” if user do not see your hard disk drive icon.
5.3Verify Win98SE/ ME has properly installed the device driver
qClick on the My Computer icon by
qSelect the Properties item.
qChoose the Device Manager selection
qDouble click the Disk drives item.
qAnd check the three INSTEP EzII DRIVE have installed.
qDouble click the Universal serial bus
qController item.
qAnd check the USB 2.0 EzDrive II has installed.
5.4Troubleshoot
§Click on My Computer icon by
§Select the Properties item.
§Choose the Device Manager selection
§Double click the others item and check if USB 2.0 EzDrive II is mark with
§an exclamation mark.
§Click on the item mark with an exclamation mark and then click Remove,
§Refresh.
§The windows will prompt for device driver again.
User Manual
12