Keys Fitness RTM-8000 owner manual Changing access codes, About the access codes

Changing access codes

About the access codes

Network Code: The code for accessing your operator’s GSM network. You can get such code from your operator

Phone code: The code for preventing unauthorized use of your RTM-8000. If Phone code is enabled, you have to enter it each time you run Dialer. The default Phone code of your RTM-8000 is 12345678. If you change the phone code from its default value, please write the new code here, or in a safe place of your own choice:

___________________

PIN code: The code that is supplied by your operator upon subscription. If the PIN code is enabled, you have to enter it each time you run Dialer.

PIN2 code: The second set of PIN code that is supplied by your operator to con- trol over certain special services.

To change access codes:

Tap ok.

Select the access code you

want to change from the drop-

down menu.

Enter the old code.

Enter the new code.

Enter the new code again to

verify.

80Using the RTM-8000