Safeguards, Wiring Requirements, Fusing Requirements

Xtant2.2/Xtant4.4 Amplifier Owner’s Manual

SAFEGUARDS

All Xtant amplifiers and accessories are intended to be installed by an Xtant-certified professional mobile audio installation specialist. It is the recommendation of Xtant Technologies that your new Xtant product(s) and all of your mobile audio products be installed by your Authorized Xtant retailer.

In the event you decide to install your new Xtant product(s), please take the time to read this Owner’s Manual in its entirety. Installation and/or use of your amplifier in applications or methods other than those specified in your Xtant amplifier owner’s manual may result in a reduction of the overall performance capability of the amplifier. Any such installation or usage renders the prod- uct warranty void. The following guidelines are designed to assure a safe and properly installed Xtant Mobile Audio System.

WIRING REQUIREMENTS

Your Xtant power amplifier is designed for use with a 12 Volt, negative ground system. Installation of your Xtant amplifier in a vehicle with a POSITIVE ground system will result in severe damage to the amplifier, other audio components and/or the vehicle’s electrical components. If your vehicle uses a positive ground system, please consult your authorized Xtant retailer or specialty install shop.

Xtant2.2 and Xtant4.4 amplifiers have minimum wire gauge requirements for:

Power - 4 gauge

Ground - 4 gauge

Speaker cables - 12 gauge

FUSING REQUIREMENTS

Xtant2.2 and Xtant4.4 amplifiers are not fuse protected! A fuse must be installed in-line with the power wire at the battery, no further than 18" from battery. For safety, an outboard fuse should be added close to the amplifier. For fuse requirements for a single amplifier, refer to page 3 of this manual. In the case of a multi-amp system, use a fuse value equal to the combined value of all system amplifier’s power fuses.

LOCATION

A firm, flat surface with minimum vibration is ideal. Your Xtant amplifier may be mounted horizontally or vertically on a flat surface. The amplifier should NEVER be mounted upside

down. This ill-advised configuration can increase internal operating temperatures, decrease the amplifier’s ability to dissipate heat and speed up the amplifier’s automatic thermal shut down

mechanism.

Under no circumstances should your amplifier be exposed to moisture and water.

To ensure adequate ventilation, the ideal location for your Xtant amplifier is an area away from any heat source, with at least 2 inches of clearance above and around the amplifier.

COMMON OVERSIGHTS

•The battery ground should remain DISCONNECTED at all stages of installation.

•Do not begin drilling until you have put your Xtant amplifier aside. Using the amplifier as a drilling guide may cause irreparable damage to the amplifier and void your warranty.

•Do not route any wires underneath or outside the vehicle body.

•Route signal wires (RCAs from source unit, speaker wires, etc.) away from power wires (power, ground, etc.) to avoid ground loops and other sources of noise.

xtant.com

4.4, 2.2 specifications

Xtant 4.4,2.2 is a cutting-edge software solution designed for professionals in various fields that require advanced data analysis and project management capabilities. Leveraging state-of-the-art technologies, the platform offers an unparalleled user experience that enhances productivity and facilitates informed decision-making.

One of the main features of Xtant 4.4,2.2 is its robust analytics engine. This tool enables users to process large datasets quickly and efficiently, allowing them to derive meaningful insights and patterns from their information. The engine supports various data formats, making it flexible enough to accommodate diverse needs across industries.

Another significant characteristic of Xtant 4.4,2.2 is its integration capabilities. The software can seamlessly connect with existing systems and applications, ensuring that users can leverage their current tools without any disruption. This interoperability extends to APIs, making it easier for users to customize their workflows and automate repetitive tasks, ultimately saving valuable time.

User-friendliness is a priority in Xtant 4.4,2.2. The interface is designed with simplicity in mind, featuring intuitive navigation and a clean layout. Users can easily access essential functionalities without extensive training, ensuring that teams can hit the ground running. Moreover, the software includes comprehensive documentation and support to assist users in maximizing its benefits.

Collaboration tools are another crucial feature of Xtant 4.4,2.2. By enabling team members to share insights, comment on projects, and track changes in real time, the platform fosters a collaborative environment conducive to innovation. Teams can work together more effectively, regardless of their geographical locations, thanks to its cloud-based architecture.

Enhanced security is a cornerstone of Xtant 4.4,2.2. With built-in encryption and stringent access controls, users can rest assured that their data is protected against unauthorized access. The software also undergoes regular updates and security patches to adapt to the ever-evolving cybersecurity landscape.

In summary, Xtant 4.4,2.2 is a comprehensive solution for professionals seeking a powerful tool for data analysis and project management. Its advanced analytics engine, integration capabilities, user-friendly design, collaboration features, and robust security measures make it an indispensable asset for organizations aiming to enhance their operational efficiency and drive growth. Whether utilized in finance, healthcare, or any other industry, this software empowers users to make data-driven decisions with confidence.