Installation, Procedure | Xtant 4.4, 2.2 specification

INSTALLATION

Any deviation from the connection specifications recommended may cause serious damage to the amplifier, speakers and/or vehicle electrical system. Please double-check the connections before turning the system on.

PROCEDURE

1.Disconnect the vehicle’s negative battery connection.

2.Using the supplied allen wrenches, remove the four (4) screws from the annealed stainless steel amplifier cover. Put this aside until your installation is complete to prevent damage to the cover.

3.Place your Xtant amplifier at the predetermined mounting location. Using a felt pen, mark the exact position of the mounting holes on the mounting surface. Set your Xtant amplifier aside. Use a sharp, precise blade to cut small circles in the carpet and padding around the four marks denoting your mounting holes to expose the metal underneath. Use a center punch to make an indentation in the metal to ensure that you drill the exact position for the screws. Drill the four holes as marked.

4.Temporarily mount your Xtant amplifier using the four (4) long screws provided.

5.Run a power cable from the vehicle’s battery through the firewall and through the interior of the vehicle connecting one end to your Xtant amplifier’s B+ terminal and connecting the other end to the positive post on the battery.

NOTE: Install a circuit breaker/fuse within 18" of the battery. This effectively lowers the risk of severe damage to your vehicle should a short circuit ever occur in the audio system. Do not install the fuse in the fuse holder until all installation steps have been completed.

6.Find a good ground spot on the vehicle’s chassis and remove the paint to reveal bare metal at the contact point. Attach the ground wire to that contact point and connect the other end of the ground wire to the GND terminal of your Xtant amplifier.

7.Connect a Remote Turn-on wire from your source unit to your Xtant amplifier’s REM terminal (14 or 16 gauge wire). If your source unit does not have a dedicated Remote Turn-on lead, you may connect to the source unit’s Power Antenna lead.

8.Connect RCA cables from your source unit to your Xtant amplifier’s RCA input jacks. If RCA (low) level output is not available, use Xtant’s High Level Adapters (HLA—not included) to connect the speaker level (high level) wires to a set of RCA cables.

9.Connect your speakers to your Xtant amplifier’s speaker terminals using 12 gauge minimum speaker cable.

10.Double-check all the previous installation steps, in particular, the wiring and component connections. Securely mount the amplifier. Remove the protective film and screw the annealed stainless steel cover back onto the amplifier.

11.If everything is in order, reconnect the vehicle’s negative battery connection and begin adjusting your amplifier. NOTE: Be sure that the Gain Level on the amplifier is turned all the way down (counter clockwise) before proceeding with adjustments.

4.4, 2.2 specifications

Xtant 4.4,2.2 is a cutting-edge software solution designed for professionals in various fields that require advanced data analysis and project management capabilities. Leveraging state-of-the-art technologies, the platform offers an unparalleled user experience that enhances productivity and facilitates informed decision-making.

One of the main features of Xtant 4.4,2.2 is its robust analytics engine. This tool enables users to process large datasets quickly and efficiently, allowing them to derive meaningful insights and patterns from their information. The engine supports various data formats, making it flexible enough to accommodate diverse needs across industries.

Another significant characteristic of Xtant 4.4,2.2 is its integration capabilities. The software can seamlessly connect with existing systems and applications, ensuring that users can leverage their current tools without any disruption. This interoperability extends to APIs, making it easier for users to customize their workflows and automate repetitive tasks, ultimately saving valuable time.

User-friendliness is a priority in Xtant 4.4,2.2. The interface is designed with simplicity in mind, featuring intuitive navigation and a clean layout. Users can easily access essential functionalities without extensive training, ensuring that teams can hit the ground running. Moreover, the software includes comprehensive documentation and support to assist users in maximizing its benefits.

Collaboration tools are another crucial feature of Xtant 4.4,2.2. By enabling team members to share insights, comment on projects, and track changes in real time, the platform fosters a collaborative environment conducive to innovation. Teams can work together more effectively, regardless of their geographical locations, thanks to its cloud-based architecture.

Enhanced security is a cornerstone of Xtant 4.4,2.2. With built-in encryption and stringent access controls, users can rest assured that their data is protected against unauthorized access. The software also undergoes regular updates and security patches to adapt to the ever-evolving cybersecurity landscape.

In summary, Xtant 4.4,2.2 is a comprehensive solution for professionals seeking a powerful tool for data analysis and project management. Its advanced analytics engine, integration capabilities, user-friendly design, collaboration features, and robust security measures make it an indispensable asset for organizations aiming to enhance their operational efficiency and drive growth. Whether utilized in finance, healthcare, or any other industry, this software empowers users to make data-driven decisions with confidence.