Pandigital V2.6 manual SettingsCalibrate Touch Screen, SettingsNetwork

4.Select your desired time format: 12HR = 12:00am-12:00pm (default) 24HR = 12:00-24:00

5.Tap in the Language field to select desired language. **Only English available at this time. Multiple languages will be available with future firmware upgrades.**

6.Tap to adjust the screen brightness. When Auto Brightness is selected, your device senses the light exposure and automatically adjusts the screen’s brightness accordingly (i.e., in dark environments the screen automatically brightens).

7.Tap next to Keyboard and System Sounds if you want to turn the keypad click and system sounds OFF (i.e., end of row ding, warning ding, etc.).

Settings>Calibrate Touch Screen

If you notice that the touch screen is not responding accurately, you may need to re-calibrate the touch screen sensors.

1.Select Settings from the Application Quick Launch Bar,  tap Calibrate.

2.Tap Calibrate to perform the calibration.

3.When the pop-up windows appear, tap the “+” in the designated spots on the screens.

4.If calibration is successful, you can resume normal use. If unsuccessful, repeat the calibration again.

Settings>Network

In order to connect to the Internet, you must have a Wi-Fi network set up on your pandigital novel.

1.Select Settings from the Application Quick Launch Bar,  tap Network.

2.If your Wi-Fi network is not listed, tap Scan.

3.The device scans and lists all local Wi-Fi Networks found. A indicates secure networks that require login name/password to connect.

4.Tap the desired network to which you want to connect,  enter the Network Password if applicable.

5.Tap to close the Settings screen.

If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap Other and then enter the network name and key,  tap Save.

(Advanced): After saving the Wi-Fi network, you can change your network settings by selecting Manual Setup, and then follow the prompts.

38