Table of Contents
Follow Steps 1 through 5 to complete the DSL Equipment Installation |
|
Step 1: Verify Your System Requirements and Documents | 3 |
Step 2: Verify the Contents of Your DSL Equipment Kit | 4 |
Step 3: Install a Telephone Filter on Every Telephone Line | 5 |
Step 4: Install the Netopia® DSL Router | 7 |
Step 5: Configure Your Computer |
|
Windows 95 and 98 Dynamic Configuration | 8 |
Windows 95 and 98 Static Configuration | 11 |
Windows 2000 Dynamic Configuration | 15 |
Windows 2000 Static Configuration | 17 |
Windows NT Dynamic Configuration | 19 |
Installing TCP/IP for Windows | 22 |
Macintosh DHCP Configuration | 26 |
Macintosh Static Configuration | 29 |
Customer Support:
IMPORTANT NOTE: This guide portrays the typical steps for the installation process. Please follow the instructions. Some computer or network configurations may cause software windows to appear that are not depicted in this guide. Please read and follow the instructions on those screens to continue the installation process. Verify that you are installing your DSL equipment AFTER the “Phone Company Commit Date” given to you when you ordered your DSL Internet Service. MegaPath Networks Inc. and its affiliates have no responsibility for any personal injury or property damage which may result from your installation of DSL Equipment as discussed in this guide. MegaPath Networks and its affiliates specifically disclaim any liability for such injury or damage. By proceeding with this installation, you assume all risk of personal injury or property damage. Please consult the documentation provided by your PC vendor to identify any impact on your warranty.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000/Mac | Page 2 |
2002 MegaPath Networks Inc. All rights reserved. |
|