Netopia manual Install the Netopia 45413 DSL Router

Page 7

Step 4: Install the Netopia 45413 DSL Router

Connect one end of the phone cord to the jack labeled “DSL” on your router, and the other end to the side of the filter labeled “ADSL HPN”. This is not necessary if the router does not share the jack with another analog device such as a phone, answering machine, fax machine, etc.

Plug one end of the Ethernet cable into one of the empty ports labeled Ethernet.

Insert the connector from the power adapter to the power port, and plug the other end into an electrical outlet.

Use Serial Port cable to transfer data between your Router and the PC if you wish to reconfigure the Router. (This step is not needed for normal installation. Call MegaPath Networks at 1-877-611-6342before you start to reconfigure the Router.)

Connect the other end of the Ethernet cable to the

Ethernet port on your computer.

Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000/Mac	Page 7
2002 MegaPath Networks Inc. All rights reserved.

Image 7

Contents DSL Equipment Installation Guide Netopia 45413 Router Table of Contents Macintosh System Requirements Verify Your System Requirements and DocumentsNetopia Router Verify the Contents of Your DSL EquipmentDesktop Phones and Analog Devices Install a Telephone Filter on Every Telephone LineWall Mounted Phones DSL Router and Analog Device on the Same Jack Install the Netopia 45413 DSL Router PC Environment Configuring Your Computer2002 MegaPath Networks Inc. All rights reserved 2002 MegaPath Networks Inc. All rights reserved Windows 95 and Windows 98 Static Configuration Optional 2002 MegaPath Networks Inc. All rights reserved 2002 MegaPath Networks Inc. All rights reserved Megapathdsl.net TypeDouble click on Local Area Connection Windows 2000 Dynamic Configuration Recommended2002 MegaPath Networks Inc. All rights reserved Windows 2000 Static Configuration Optional 2002 MegaPath Networks Inc. All rights reserved Windows NT Dynamic Configuration Recommended 2002 MegaPath Networks Inc. All rights reserved 2002 MegaPath Networks Inc. All rights reserved From the Start menu, open Settings/Control Panel Installing TCP/IP for Windows2002 MegaPath Networks Inc. All rights reserved 2002 MegaPath Networks Inc. All rights reserved 2002 MegaPath Networks Inc. All rights reserved MAC Environment Macintosh Dhcp Configuration Recommended2002 MegaPath Networks Inc. All rights reserved Single left click on File, then select Quit Macintosh Static Configuration 2002 MegaPath Networks Inc. All rights reserved 2002 MegaPath Networks Inc. All rights reserved Enter 66.80.130.23 Single click on File, then select Quit Warranty On Routers Troubleshooting