Xtant A3001/A6001 owner manual Standard Features, Xtant A3001 Specifications

Page 4

Standard Features

English

 

Subsonic Filter

24dB/Octave Variable 20-80 Hz

Fully Regulated PWM Power Supply

All Xtant “A” Series amplifiers feature a Fully Regulated, Pulse Width Modulated power supply. This supply technology provides high efficiency and consistent output performance even when battery voltage is less than optimum.

Crossover

A 24dB/Octave low pass filter network with variable 40-120 Hz frequency selection is included.

Balanced/Floating Input

When enabled, this circuitry helps to eliminate “system noise” associated with “ground loops”. When combined with the input sensitivity adjustment, it allows the A Series to accept up to 17V of input signal. Balanced must be used for BTL inputs using the HLA.

Protection Circuitry

Both Thermal and Overcurrent protection are incorporated into the “A” Series Amplifiers. In the event of a problem, the amplifier will reduce its power to maintain operation.

Status LEDs (Located on the top of the amplifiler)

Three LEDs, indicate operational status of all Xtant A Series amplifiers. The red LED illuminates when the amplifier is “ON”, the yellow LED indicates that overcurrent protection is engaged, the orange LED indicates that the thermal protection circuit is engaged.

Optional Performance Upgrades

High Level Adapter (HLA)

This adapter allows you to connect a source unit with speaker level outputs to your Xtant amplifier.

Remote Level Control (RLC)

The RLC or Remote Level Control allows a remote bass control to be adjusted from the driver’s seat.

English

Xtant A3001 Specifications

 

 

 

Frequency Response:

 

20 Hz to 120 Hz +/– 1 dB

Number of Channels:

 

1

Watts per Channel @ 4Ω

:

1 x 150

Watts per Channel @ 2Ω

:

1 x 300

Recommended Load:

 

≥ 2Ω

Distortion (THD):

 

≤ 2%

Measured: 20 Hz to 120 Hz at rated power, all channels driven 4Ω

Signal to Noise Ratio:

 

≥ 100 dB

Measured: A-weighted in 20 kHz noise bandwidth @ 1 volt sensitivity

Damping Factor:

 

≥ 100 @ 100 Hz with 4Ω load

Input Sensitivity:

 

100 mV to 8.5 V RMS Unbalanced

 

 

 

200 mV to 17 V RMS Balanced

Input to Line Output Gain:

 

0 dB

On-Board Crossover:

 

24 dB/Octave Low Pass

Balanced Line:

 

 

On Board

Power Supply:

 

Fully Regulated, PWM

Operational Voltage:

 

10 to 16 Volts

Fusing Requirement:

 

40 Amp

Size (L xW x H):

 

11-5/8” x 9-1/4” x 1-7/8”

 

 

 

295mm x 235mm x 47mm

Subsonic Filter:

 

24 dB/Octave 20-80 Hz

Bass Boost:

 

 

0-12 dB @ 45 Hz

Warranty:

 

 

Limited 4 Year Parts and Labor

 

 

 

(See page 8 for details)

4

5

Page 3 Page 5
Image 4
Page 3 Page 5
Contents XT000472 4/01 NDM175 Table of contents EnglishSafeguards Technical ServicesWelcomeEnglish Standard Features Xtant A3001 SpecificationsXtant A6001 Specifications Connection DiagramsServices Techniques FrançaisBienvenueOptions standard Consignes de sécuritéExtensions en option pour améliorer la performance 200 mV à 17 V RMS symétrique DeutschWillkommen Schémas de connexion FrançaisTechnischer Kundendiens SafeguardsDeutsch DeutschStandardfunktionenXtant A3001 Technische Daten EspañolBienvenido SchaltpläneDeutschServicio Técnico PrecaucionesEspañol Características estándarXtant A3001 Especificaciones Técnicas delXtant A6001 Diagramas de conexión Xtant Four Year Limited Warranty Electronics Speakers

A3001/A6001 specifications

The Xtant A3001 and A6001 are two cutting-edge audio amplification solutions that stand out in the realm of high-fidelity sound. Designed for audiophiles and sound professionals alike, these models combine innovative technologies with user-friendly features, making them ideal for a wide range of audio applications, including home theaters, professional studios, and automotive sound systems.

At the heart of both models is a powerful Class D amplification technology. This allows for higher efficiency and lower heat generation compared to traditional Class A or Class AB amplifiers. The A3001 and A6001 deliver impressive power output, ensuring clean and dynamic audio reproduction. The A3001 is designed to provide robust amplification for smaller systems, while the A6001 caters to larger setups, offering even greater power without sacrificing sound quality.

One of the defining characteristics of these amplifiers is their meticulous engineering. Both models feature high-quality components, including premium capacitors, precision resistors, and advanced cooling systems, which work together to enhance performance and durability. The design minimizes distortion and maximizes the clarity and punch of sound, making every listening experience immersive.

Connectivity is another key feature of the Xtant A3001 and A6001. They come equipped with multiple input options, including RCA and balanced connections, allowing users to integrate them easily into existing audio systems. This versatility ensures compatibility with various devices, from preamps to digital audio players, making them suitable for both analog and digital audio sources.

Additionally, both models are designed with user-friendliness in mind. The intuitive interface includes easy-to-access controls for tone adjustment and volume, ensuring that users can tailor their audio experience to their preferences without hassle. The compact form factor makes them easy to install in diverse environments, from home setups to vehicles.

In summary, the Xtant A3001 and A6001 amplifiers embody the perfect blend of power, clarity, and versatility. Their Class D technology, high-quality components, and user-friendly features make them an excellent choice for anyone seeking to enhance their audio experience. Whether you're a casual listener or a dedicated audiophile, these amplifiers offer excellent performance that elevates sound reproduction to new heights.
Top Page Image Contents