Xtant A3001/A6001 owner manual Xtant A6001 Specifications, Connection Diagrams

Page 5

Xtant A6001 Specifications

 

English

 

 

Frequency Response:

 

20 Hz to 120 Hz +/– 1 dB

Number of Channels:

 

 

 

1

Watts per Channel @ 4Ω

:

 

1 x 300

Watts per Channel @ 2Ω

:

 

1 x 600

Recommended Load:

 

 

2Ω

Distortion (THD):

 

 

2%

Measured: 20 Hz to 120 Hz at rated power, all channels driven 4Ω

Signal to Noise Ratio:

 

 

≥ 100 dB

 

English

 

Connection Diagrams

 

 

 

 

 

 

 

1.Input – Xtant A series amplifiers feature RCA type input connections.

1

2

Source units with an output signal level of 100mV – 17V may be used.

 

See "Balanced Input" for proper voltage level setting.

 

 

2.Output – These RCA type output connections send full range sig- nals to additional amplifiers eliminating the need for "Y" connectors.

3.Balanced Input – The balanced input switch serves two purposes.

3First, it helps eliminate noises being induced into the signal path by isolating the signal ground. Second, it is used to set the proper input voltage range:

Off Position: 100mV – 8V

On Position: 200mV – 17V

4. Gain – This feature is used to fine-tune the input sensitivity of the

4

amplifier to the source unit’s output level.

Measured: A-weighted in 20 kHz noise bandwidth @ 1 volt sensitivity

Damping Factor:

≥ 100 @ 100 Hz with 4Ω load

Input Sensitivity:

100 mV to 8.5 V RMS Unbalanced

 

200 mV to 17 V RMS Balanced

Input to Line Output Gain:

0 dB

On-Board Crossover:

24 dB/Octave Low Pass

5

5.Xover Frequency Control – This control allows the user to choose the exact low-pass frequency range the amplifier will play for the best possible performance. The upper end of the crossover frequen- cies can be selected from 40Hz – 120Hz at 24dB per octave.

6. Bass Boost – This feature will add up to 12dB of low frequency impact to the audio system. The Bass Boost is centered at 45Hz.

7. Subsonic – This feature limits the lower end of the low-pass fre- quencies sent to the subwoofers. The subsonic feature includes a selectable on/off switch, and a control knob used to adjust the

Balanced Line:

On Board

Power Supply:

Fully Regulated, PWM

Operational Voltage:

10 to 16 Volts

Fusing Requirement:

80 Amp

Size (L xW x H):

15-13/16” x 9-1/4” x 1-7/8”

 

402mm x 235mm x 47mm

Subsonic Filter:

24dB/Octave 20-80 Hz

Bass Boost:

0-12dB @ 45 Hz

Warranty:

Limited 4 Year Parts and Labor

 

(see page 8 for details)

6

6lower end of the low-pass range. The subsonic setting can be selected from 20Hz-80Hz at 24dB per octave.

8.RLC – This port allows the use of the optional Xtant "remote level control" (RLC). The RLC is a bass control module that can be installed in any location within the vehicle for remote adjustments.

79. Speaker Connection – Two sets of speaker terminals are provid- ed for dual woofer applications. When connecting a single woofer, use only one set of speaker terminals. Warning, the Xtant A3001 and A6001 are not bridgeable.

10.Power Terminals – This is the main power connection for the amplifier. The power and ground wire size should be the same gauge.

8

GND – The ground wire from this connection must be attached to bare metal on the vehicle.

REM – To turn the amplifier on/off, this terminal must be connected to the source unit’s "remote or electric antenna" wire.

+12V – The power wire from this connection must be attached to

9an inline fuse, then to the positive side of the vehicle battery.

WARNING: An outboard fuse must be installed in-line with the power wire within 18 inches of the battery.

7

10

Image 5
Contents XT000472 4/01 NDM175 Table of contents WelcomeEnglish Technical ServicesEnglishSafeguards Xtant A3001 Specifications Standard FeaturesConnection Diagrams Xtant A6001 SpecificationsFrançaisBienvenue Services TechniquesExtensions en option pour améliorer la performance Consignes de sécuritéOptions standard 200 mV à 17 V RMS symétrique Technischer Kundendiens Schémas de connexion FrançaisDeutschWillkommen DeutschStandardfunktionen SafeguardsDeutschXtant A3001 Technische Daten Servicio Técnico SchaltpläneDeutschEspañolBienvenido Características estándar PrecaucionesEspañolXtant A6001 Especificaciones Técnicas delXtant A3001 Diagramas de conexión Electronics Speakers Xtant Four Year Limited Warranty

A3001/A6001 specifications

The Xtant A3001 and A6001 are two cutting-edge audio amplification solutions that stand out in the realm of high-fidelity sound. Designed for audiophiles and sound professionals alike, these models combine innovative technologies with user-friendly features, making them ideal for a wide range of audio applications, including home theaters, professional studios, and automotive sound systems.

At the heart of both models is a powerful Class D amplification technology. This allows for higher efficiency and lower heat generation compared to traditional Class A or Class AB amplifiers. The A3001 and A6001 deliver impressive power output, ensuring clean and dynamic audio reproduction. The A3001 is designed to provide robust amplification for smaller systems, while the A6001 caters to larger setups, offering even greater power without sacrificing sound quality.

One of the defining characteristics of these amplifiers is their meticulous engineering. Both models feature high-quality components, including premium capacitors, precision resistors, and advanced cooling systems, which work together to enhance performance and durability. The design minimizes distortion and maximizes the clarity and punch of sound, making every listening experience immersive.

Connectivity is another key feature of the Xtant A3001 and A6001. They come equipped with multiple input options, including RCA and balanced connections, allowing users to integrate them easily into existing audio systems. This versatility ensures compatibility with various devices, from preamps to digital audio players, making them suitable for both analog and digital audio sources.

Additionally, both models are designed with user-friendliness in mind. The intuitive interface includes easy-to-access controls for tone adjustment and volume, ensuring that users can tailor their audio experience to their preferences without hassle. The compact form factor makes them easy to install in diverse environments, from home setups to vehicles.

In summary, the Xtant A3001 and A6001 amplifiers embody the perfect blend of power, clarity, and versatility. Their Class D technology, high-quality components, and user-friendly features make them an excellent choice for anyone seeking to enhance their audio experience. Whether you're a casual listener or a dedicated audiophile, these amplifiers offer excellent performance that elevates sound reproduction to new heights.