Neuro Logic Systems 19, 17 Connecting your LCD/Keyboard, Server, all systems should be turned off

RFT2 Rack Kit Installation Guide

Connecting your LCD/Keyboard

Step	Detail
! Note: Before connecting the LCD monitor/keyboard to a KVM or
		DVI	HD-15
Server, all systems should be turned off.

1.The keyboard and trackball’s design allows it to be used with most Sun systems. The RFT2 comes with a USB style connector.

2.The monitor uses a standard HD-15 or DVI male video connector. If your Sun system uses a DB13W3 connection, you can use a Sun

adapter to interface between the LCD connector and the Sun system. (PN: X3872A)

3. If both HD-15 and DVI cables are connected at the same time, HD-15	Power	USB
will be the default input.

4.Connect the monitor to a power source. The LCD Monitor’s power supply is auto ranging, and will operate on AC voltages ranging from

90-264V and 50-60 Hz. The monitor uses an IEC 320-C14 connector and a 2m IEC C13 to C14 cable is included. An adapter will be required to interface with other connector types.

5.Secure the cables to ensure they will not bind when operating the LCD/keyboard slide mechanism. Cycle the tray in and out of the cabinet to ensure there is enough of a service loop in the cables. Zip ties may be used to hold the cables securely to the back of the unit.

07/01/06 Rev 1.0 Page 7 of 13