RFT2 Rack Kit Installation Guide
Cable Management Installation
1. | With the RFT installed, go to the back of the rack to |
| |
| install the cable management system. |
| |
| Note the guide that will fit into | ||
2. | Attach Part A to part extension of outer member on | ||
the mating portion on the slide | |||
| the left slide. |
| |
|
|
| Part A |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
3. Connect Part B to the inside right hand side slide |
|
|
|
|
|
member by sliding it into place. A “click” will be heard |
|
|
|
|
|
|
| Part C |
|
| |
once it is secured. The Cable Management System |
|
|
|
| |
|
|
|
|
| |
is designed to have the |
|
|
|
|
|
bottom…not the top. |
|
|
|
|
|
4.Connect Part C to the outside right hand side slide member. Note that the extruded portion on the top of Part C needs to line up with the mating portion on the outer slide member. Similar to Step 2 above. A “click” will be heard once it is secured.
Part B
5.Insert Part D into Part A on the left hand side. The large tab on Part A will keep Part D in place.
Part D
Part A
07/01/06 Rev 1.0 | Page 6 of 13 |