Netopia Network Adapater manual LED description, Eth

Page 9

User Guide

2.2LED description

Fig 2-2shows the LED indicators of the VOIP ATA.

 

 

Figure 2-2 : LED Indicators

 

 

 

LED

STATUS

DESCRIPTIONS

PWR

On

The VOIP ATA is receiving power.

ETH

On

The VOIP ATA has an Ethernet connection with cable/DSL

 

 

modem.

 

Blinking

The VOIP ATA is sending/receiving dVoIP ATA to/from

 

 

the cable/DSL modem.

 

Off

The VOIP ATA doesn’t have an Ethernet connection with

 

 

the cable/DSL modem.

PHONE

On

This port(s) is registered to the Internet Phone Service

 

 

Provider(s).

 

Blinking

The telephone(s) connected to this port(s) is(are) off-hooked.

 

Off

This port(s) isn’t registered to the Internet Phone Service

 

 

Provider(s).

 

 

Table 2-2 : LED Descriptions

User Guide

2-9

Image 9
Contents Netopia Voip ATA User’sGuide Revision Status Tables Of Content Appendix a Glossary User Guide Introduction Call features Main features Call Out & CallSetup & Configuration Audio Codec FeatureYour Voip ATA at a glance Ports and buttons12V DC ETH LED descriptionInstalling Your Voip ATA Adsl Connection DiagramTypical Voip ATA Connection 2below shows a Cable Modem+Router connection diagram Cable Connection DiagramConnection via Company Network For Company Network ConnectionSetting Up Your Voip ATA functionality via Access to Voip ATA’s GUIAccessing GUI Using Static IP User Guide Accessing GUI Using Hub/Switch Accessing GUI Using Hub/SwitchUser Guide Overall Status Setup ModeNetwork Selection Overall Status Basic ModeFirmware Version Registration StatusVoice Call Status Descriptions Current Voice Call StatusWAN Connection Type WAN StatisticTCP Status Reset CountersGeneral Discarded PacketsSystem Log Clear LogSave Log Basic Configurations User Configured DNS ConfigurationDNS Proxy Auto DiscoveredDNS Server Setting DNS Proxy SettingSave Configuration Host IPSave Settings / Reboot Save & RebootReboot Only Rebooting Modem Advanced Mode User Guide Service Provider List SIP Service ProviderNew Service Provider Registration IntervalUser Guide Service Provider Action Authentication MethodRegistrar Port Proxy PortPassword Voip ATA Login Account ConfigurationUser Profile List New User ProfileSubmit Changes Login ActionPredial Timeout Voip ATA Timer ConfigurationAlert Timeout Disconnect TimeoutUser Guide Call Fwd No Ans Timeout Working Country Ringtone ConfigurationNew Country Ring ParametersUser Guide RingBack tone Normal Dial ToneAlerting Tone Recall ToneSubmit Changes Misc Configuration SIP DeviceStun Parameters User Guide Stun Port Stun ServerForce Keep Alive Keep Alive PeriodAddress Book Address Book ConfigurationUser Guide User Guide Admin Privilege Miscellaneous ConfigurationHttp Server FTP Server Admin / Username Password ConfigurationTftp Server Sntp ClientUser Guide Restore Settings Reset to DefaultHow to Firmware Update Firmware UpdateUploading .DLF file 13 Save / Reboot Save / Reboot15 Rebooting Modem Making Phone Calls VoIP Advanced Call Features Consultation HoldInternet Calls Pstn CallsAttended Transfer 4 3-Way Conferencing How ToCall Waiting Call Forwarding Forward When Busy Forward UnconditionalForward On No Answer Call Return Canceling Call ForwardingIP Dialing IP Address Through ServerProblem Corrective Action TroubleshootingAppendix a Glossary User Guide 10-63 User Guide 10-64 User Guide 10-65 Appendix B Dial Plan for Pulver B1 Basic Dial Plan B1.1 Pulver USA Dial PlanB1.2 Explanation of the Rules Descriptions User Guide 10-67 Service Provider Partner Recommended Dial Plan Rule B2 Calling Other Service Provider Numbers through PulverUser Guide 10-69