Moen 200-0564 manual Deleting Frequencies

5.Press ENTER. The scanner stores the frequency in the selected channel.

6.To move another monitor memory frequency to the next channel, press PGM and repeat Steps 3-5.

Moving Frequencies from Monitor Memories to a Bank

Your scanner can move all the frequencies you have stored in monitor memories into a bank you specify.

Notes:

If there are more frequencies in the monitor memories than there are empty channels in the bank you select, the scanner moves only as many frequencies from the monitor memories as it has room for in the bank.

The scanner moves monitor memory frequencies into channels even if the same frequencies are already stored in other channels.

1.Press AUTO. The bar under the current bank number flashes, and AUTO and AC-XXCH appear where XX is the number of available channels in the current bank. If the current bank is full, A-FULL appears.

2.Repeatedly press AUTO to select the channel-storage bank where you want to store monitor memory frequencies.

3.Hold down ENTER, then press MON. The scanner moves all frequencies stored in monitor memories into the bank.

Moving Frequencies from Banks to Monitor Memories

You can move all stored frequencies within a bank to monitor memories. This lets you quickly clear channels within a bank without losing the frequencies.

Important:

If you move frequencies from a bank to monitor memories, all frequencies already in the monitor memories are replaced with those frequencies and any empty channels from the bank.

1.Press AUTO. AUTO appears.

2.Repeatedly press AUTO to select the channel-storage bank that has the frequencies you want to move.

3.Hold down ENTER, then press DIRECT/. . The scanner automatically moves all frequencies in channels within the bank to monitor memories.

DELETING FREQUENCIES

Deleting a Frequency from a Channel or Monitor Memory

1. Press PGM.