Moen 200-0564 manual Sorting Frequencies Within a Bank

2.Use the number keys to enter the channel number or monitor memory number containing the frequency you want to delete.

3.If you are deleting the frequency from a channel, press PGM. If you are deleting the frequency from a monitor memory, press MON.

4.Press 0, then press ENTER. The frequency is deleted.

5.To delete more frequencies, repeat Steps 2-4.

Deleting Frequencies from All Channels Within a Bank

You can delete the frequencies in all channels within a bank. This lets you quickly delete all frequencies from a bank if, for example, you want to use the bank to store a different set of frequencies.

1.Press AUTO. AUTO appears.

2.Repeatedly press AUTO to select the channel-storage bank that has the frequencies you want to delete.

3.Hold down ENTER, then press CLEAR.

Deleting Frequencies from All Locked-Out Channels Within a Bank

You can delete the frequencies in all locked-out channels within a bank. This lets you delete all the old or uninteresting frequencies in channels you have locked out.

1.Press AUTO. AUTO appears.

2.Repeatedly press AUTO to select the channel-storage bank that has the frequencies you want to delete.

3.Hold down ENTER, then press L/OUT.

SORTING FREQUENCIES WITHIN A BANK

You can sort the frequencies you have stored within a bank. The scanner moves the frequencies into consecutive channels, either from the lowest to the highest frequency, or the highest to the lowest frequency. This makes it easy for you to see the range of frequencies you found

(during auto store for example).

Notes:

During frequency sort, the scanner moves the frequencies it finds within the bank from higher channels to lower, empty channels.

If you turn the scanner off during frequency sort, the scanner stays on until it saves the portion of the sort it completed. Then it turns itself off.

1.Press AUTO. AUTO appears.

2.Repeatedly press AUTO to select the channel-storage bank that has the