Momentum Sales & Marketing MO8ME manual Connection and Startup, Power

Page 10

Chapter 2
Connection and Startup	2

Power

Only use with the power supplies provided by Pro Co Sound.

OR

Only use 802.3af PoE power supplies.

The Momentum output unit requires 48VDC power to operate. There are two ways to power the unit:

1.Use the Pro Co One Spot power supply. It is shipped with the unit and allows the powering of only one device. An alternative to the One Spot is the Multi Unit Power Supply (MUPS). This power supply comes with three jumper cables that will allow up to four units to be linked together and powered by one MUPS. The MUPS is an additional option and must be ordered separately.

2.Use a standard Gigabit IEEE 802.3af PoE network switch and power up through the Ethernet cable. The POE switch must be capable of 15Watts per Ethernet port.


Ethernet		port	One Spot or MUPS power supply ports

Momentum mo8me Manual

10

Image 10

Contents Mo8me Warranty How obtain Warranty servicesTable of Contents Use Extreme Caution Welcome Mo8meFeatures Momentum SystemBlock Diagram Description of the mo8meMo8me Enclosure Digit readout display and control keysRear Panel Power Connection and StartupPin T568B female Network WiringDescription Network Conﬁgurations Basic Mix SystemSetup Network Clock SyncSetting Device Before Use Control Panel Functions F1 and F2 FunctionsDescription of Functions Please noteIP Address Edit Tweak Overview and Setup Menu LayoutFeatures of the Tweak OverviewFirst Power Up Powering UpOpening Screen Communication Time Out Screen Soft KeySetup Menu Navigating to the Setup MenuDescription of Setup Menu Setting the RoutingConnecting to a mo8me Unit Selecting Mono or Stereo ModeSelecting Default Mix and Master User What is a Default Mix?Adjusting the Back Light Setting the Time Out and Back LightSetting the Time Out Assigning Your Tweak an ID NumberEnabling the Password Disabling the PasswordTweak Mixing Main Mix MenusSelect Mix Menu Channel Mix Menu 1-16Setting Channel Volume Setting Your Input Levels For Master User Mix 1, Mix 1Naming Input Channels Why name individual input channels? Adjusting and Clearing EQ Levels for Channels Setting Your Output Levels MixesEQ Speciﬁcations Selecting a Solo Channel Setting the Pan for Stereo ChannelsWhat does it mean? Muting a Channel Setting Master Mix Name Setting Your Output Channel Master Mix LevelsSetting Master Mix Volume Setting Master Mix EQSaving Mixes Recalling Mixes Output Module mo8me Network Speciﬁcations