Momentum Sales & Marketing MO8ME manual Network Wiring, Pin T568B female, Description

Page 11

Chapter 2	Connection and Setup

Network Wiring

Copper Wiring

•Use a minimum of CAT5E or CAT6 network cable

•Maximum cable length is 100 meters

•Maximum cable length with POE is 50 meters.

Copper Connection

•Use T568B or equivalent connectors when wiring your system. This view shows the color code as viewed from the front of the female socket or the rear of the male connector.

•Crossover wiring is not needed; the Momentum network interface compensates for unit-to-unit connections.

Pin T568B (female)

1Orange/White

2Orange

3Green/White

4Blue/Power

5Blue/White

6Green Receive

7Brown/White

8Brown Power

Description

Bi-directional pair +A Bi-directional pair - A Bi-directional pair +B Bi-directional pair +C Bi-directional pair - C Bi-directional pair - B Bi-directional pair +D Bi-directional pair - D

T568B

Fiber Connection (Optional)

The Momentum Fiber option uses ST style connectors and operates at 850nm. The system is fully IEEE 802.3z Gigabit Ethernet compliant. The following are performance based on the cable type:

220 meter distance use 62.5/125um MMF 160MHz Km Cable

275 meter distance use 62.5/125um MMF 200MHz Km Cable

500 meter distance use 50/125um MMF 400MHz Km Cable

550 meter distance use 50/125um MMF 500MHz Km Cable

Momentum mo8me Manual

11

Image 11

Contents Mo8me How obtain Warranty services WarrantyTable of Contents Use Extreme Caution Mo8me WelcomeMomentum System FeaturesDescription of the mo8me Block DiagramDigit readout display and control keys Mo8me EnclosureRear Panel Connection and Startup PowerDescription Network WiringPin T568B female Basic Mix System Network ConﬁgurationsNetwork Clock Sync SetupSetting Device Before Use F1 and F2 Functions Control Panel FunctionsPlease note Description of FunctionsIP Address Edit Menu Layout Tweak Overview and SetupOverview Features of the TweakOpening Screen Powering UpFirst Power Up Soft Key Communication Time Out ScreenNavigating to the Setup Menu Setup MenuSetting the Routing Description of Setup MenuSelecting Mono or Stereo Mode Connecting to a mo8me UnitWhat is a Default Mix? Selecting Default Mix and Master UserAssigning Your Tweak an ID Number Setting the Time Out and Back LightSetting the Time Out Adjusting the Back LightDisabling the Password Enabling the PasswordMain Mix Menus Tweak MixingChannel Mix Menu 1-16 Select Mix MenuNaming Input Channels Why name individual input channels? Setting Your Input Levels For Master User Mix 1, Mix 1Setting Channel Volume EQ Speciﬁcations Setting Your Output Levels MixesAdjusting and Clearing EQ Levels for Channels What does it mean? Setting the Pan for Stereo ChannelsSelecting a Solo Channel Muting a Channel Setting Master Mix EQ Setting Your Output Channel Master Mix LevelsSetting Master Mix Volume Setting Master Mix NameSaving Mixes Recalling Mixes Network Speciﬁcations Output Module mo8me