Chapter 2 |
|
Connection and Startup | 2 |
Power
Use only with the power supplies provided by Pro Co Sound.
OR
Use only 802.3af PoE power supplies.
The Momentum output unit requires 48VDC power to operate. There are two ways to power the unit:
1.Use the Pro Co One Spot power supply. It is shipped with the unit and allows the powering of only one device. An alternative to the One Spot is the Multi Unit Power Supply (MUPS). This power supply comes with three jumper cables that will allow up to four units to be linked together and powered by one MUPS. The MUPS is an additional option and must be ordered separately.
2.Use a standard Gigabit IEEE 802.3af PoE network switch and power up through the Ethernet cable. The POE switch must be capable of 15Watts per Ethernet port.
|
|
|
|
|
|
Ethernet | port | One Spot or MUPS power supply ports | |||
Momentum mo8 Manual | 9 |