Momentum Sales & Marketing MO8 manual Mo8 Speciﬁcations

Page 19

Chapter 4
mo8 Speciﬁcations
mo8 Speciﬁcations		4


Output Module: mo8
Resolution	24 bit, 48/96 kHz
Output Impedance	75k ohms, balanced
Maximum Output Level	+7dBu
Noise Floor	<-115dBu 150ohm
	source impedance
Dynamic Range	110dB, minimum
Crosstalk	<-100dB at 1 kHz
Frequency Response	20-20kHz +/- 0.05dB

Network Speciﬁcations

Standard Gigabit Ethernet Protocol

Power Over Ethernet (PoE) 802.3af Compliant

Up to 256 total active system inputs at 48K or 96K sampling

Onboard memory and programming

0.315 ms A/A latency 96K sampling (no DSP)

0.630 ms A/A latency 48K sampling (no DSP)

1.00 ms A/A latency 48K sampling (with DSP)

Open UDP Ethernet communication for 3rd party control

Momentum mo8 Manual

19

Image 19

Contents Mo8 Warranty Table of Contents Use Extreme Caution Welcome Momentum System FeaturesMo8 Enclosure Rear Panel with Contractor Panel Rear PanelConnection and Startup PowerFiber Connection Optional Network WiringCopper Wiring Copper ConnectionOne to One Connection Network ConﬁgurationsStage 48 x 8 Typical Snake SystemChn=009 Adr=002 48 x8 With Split Network SystemUsing the Control Panel SetupNetwork Clock Sync Sample Rate Setting Device Before UseStart Channel Route IP AddressF1 and F2 Functions Control Panel FunctionsDescription of Functions Channel Start Route Off or Mo8 Speciﬁcations