Metrologic Instruments Steps to link MS9530 Voyager RF with Base Station, MS9530 Voyager RF ID

Page 2

1.- Steps to link MS9530 Voyager RF with Base Station.

-Please read the following barcodes: 1º.-

Enter configuration

2º.- (*) Skip this step if you just want to change the link to another Base station.

Following parameters are set:

-Base Station serial number :9999999999 -Voyager ID: 1

3º.-

4º.-

5º.-

Ready to read the new Serial number of Base Station to send data to.

Read Base Station serial number.

Exit Configuration

2.- MS9530 Voyager RF ID:

-Up to five units can work together with same Base Station. It is requested that each of them uses a different ID. Use this section to fix the desired ID.

Image 2
Contents Page MS9530 Voyager RF ID Steps to link MS9530 Voyager RF with Base StationRead Base Station serial number Please read the following barcodes 1ºPlease read the following barcodes Base Station Wedge PC connectionBase Station RS-232 9600,8,N,1 + Crlf