Microstar G41M manual Front Panel Connectors JFP1, JFP2, CD-In Connector CDIN1, JFP2 JFP1

MS-7563 Mainboard

Front Panel Connectors: JFP1, JFP2

These connectors are for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.

		JFP2			JFP1
					10	9
		+ 8	7
					Power -	+Reset
	Speaker	-	Power		Switch +	- Switch
		+			Power	- HDD
			LED
		- 2			LED 2	1 +LED
			1
		JFP1 Pin Definition
PIN	SIGNAL			DESCRIPTION
1	HD_LED +			Hard disk LED pull-up
2	FPPWR/SLP			MSG LED pull-up
3	HD_LED -			Hard disk active LED
4	FPPWR/SLP			MSG LED pull-up
5	RST_SW -			Reset Switch low reference pull-down to GND
6	PWR_SW+			Power Switch high reference pull-up
7	RST_SW +			Reset Switch high reference pull-up
8	PWR_SW-			Power Switch low reference pull-down to GND
9	RSVD_DNU			Reserved. Do not use.
			JFP2 Pin Definition
	PIN		SIGNAL		DESCRIPTION
	1		GND		Ground
	2		SPK-		Speaker-
	3		SLED		SuspendLED
	4		BUZ+		Buzzer+
	5		PLED		PowerLED
	6		BUZ-		Buzzer-
	7		NC		Noconnection
	8		SPK+		Speaker+

CD-In Connector: CD_IN1

This connector is provided for external audio input.

CD_IN1

L GND R

2-16