Micro Technic PV-5127A user manual RS232, PV-5127 CN3, Pin Function

Page 15

Users Manual & Installation Guide

PV- 5127: Power supply module with UPS

RS232

The PV-5127 has a connector (CN3, labelled “RS232”) that can be connected to an RS232 port on the CPU. The PV-5127 provides two handshake outputs with status information, and one handshake input for controlling shutdown. The RxD and TxD signals are not used, the only used signals are Ground and the three handshake signals. The three signals are compatible with the “simple signalling” or “basic signalling” protocol used by other UPS units.

The 10-pin connector, CN3 is designed to be used with a simple ribbon cable ending in a DB9 female connector to be plugged into a DB9 male RS232 connector on the CPU.

￿"#￿￿$

$￿￿)￿￿

￿￿￿￿

￿￿￿￿￿

￿￿￿￿

￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿

￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿(

 

 

 

 

 

 

 

￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿%￿&'￿￿￿￿￿￿￿￿￿

The signals use normal RS232 voltage levels. Inactive (‘0’) = -10V, active (‘1’) = +10V. In the table shown inputs are indicated by (i) and outputs by (o).

 

PV-5127 CN3

Pin

Function

1

Battery low(o)

2

 

3

 

4

UPS_active(i), see note

5

 

6

Mains failure(o)

7

Shutdown(i)

8

 

9

GND

10

 

 

CPU RS232 DB9

Pin

RS232

Function

1

CD

Battery low(i)

2

 

 

3

 

 

4

DTR

Shutdown(o)

5

GND

GND

6

 

 

7

RTS

UPS_active(o)

8

CTS

Mains failure(i)

9

 

 

Note: The UPS_active signal is currently unused by the PV-5127.

Page 15 of 31

Image 15
Contents Micronix PC/104 Power Supply Table of contents PV- 5127 Power supply module with UPS Revision number Reason for change Date Revision historyModel no Description AccessoriesGeneral information Ordering codesDescription Block DiagramPV- 5127 Power supply module with UPS Connectors LED name Pin no Function Heater and fan control and external LEDs connector CN2Mode LED color Function RS232 connector CN3Pinheader ST3 ATX connector CN10Ext. sensor connector J2 Batt. sensor connector J1PC/104 bus connector CN1 Warm System temperatureToo cold CoolPV- 5127 Power supply module with UPS UPS Control Pson signalRS232 PV-5127 CN3Pin Function When the system is too hot Mains failure Battery low StatusStatus port 251h, read only 0000bmss PC/104 interfaceAddress Read/write Function Signature port 250h, read onlyBatstatus port 252h, read only nn0cctvv RS232STATUS port 253h, read only uuuu0000Shutdown port 254h, read/write Software compatibility SoftoffLead-acid charger Battery monitor and chargerBattery voltages ST1 installedBattery LED Meaning Installed on J1 Charger functionATX and Softoff state machines Main DC/DC converter and 5V STB5V+12V outputs Softoff state machine ATX on/off state machineIt can be illustrated like this Output Voltage Technical dataOutput power Input voltageEnvironmental specifications Mechanical layout Installation guide Precautions to ESDSettings and connections Connection number in KL3 Function Connection in KL2 FunctionUinV TcapC Tamb max.C PoutW Thermal considerationsDifferences between PV-5127 and PV-5127A Block diagram of the PV-5127A

PV-5127A, PV-5127 specifications

The Micro Technic PV-5127 and PV-5127A models represent a significant achievement in the field of precision measurement instruments, specifically designed to enhance efficiency and accuracy in various industrial and scientific applications. These devices are characterized by their robust construction, user-friendly interface, and advanced technological features that cater to the needs of professionals.

One of the standout features of both the PV-5127 and PV-5127A is their high-resolution digital display, which provides clear readouts of measurements, ensuring that users can easily interpret data in real time. The devices boast a wide measurement range, allowing them to perform accurate readings across various parameters, including voltage, current, and resistance. This versatility makes them ideal for use in labs, research facilities, and fieldwork.

The PV-5127 and PV-5127A incorporate advanced microprocessor technology, ensuring precise measurements and quick response times. This technology enhances the instrument's ability to perform complex calculations, making it suitable for various applications, including electronics testing, industrial maintenance, and educational purposes.

Both models feature intuitive controls, enabling users to navigate functions effortlessly. The user interface is designed for simplicity, minimizing the learning curve for new users while empowering seasoned professionals to utilize the instruments to their full potential. Additionally, the PV-5127A includes enhanced features such as data logging and connectivity options, allowing users to transfer data to computers or other devices for further analysis.

Durability is another notable characteristic of these models. Constructed to withstand harsh working conditions, the PV-5127 and PV-5127A are built with high-quality materials that protect against impacts and environmental factors, ensuring longevity and reliability.

Power efficiency is also a critical aspect, as both models offer low power consumption without compromising performance. This feature is particularly important for users who rely on portable devices for extended periods.

In summary, the Micro Technic PV-5127 and PV-5127A models are sophisticated measurement instruments that combine advanced technology with user-friendly design. Their versatility, durability, and efficiency make them valuable tools for professionals across various fields, enhancing productivity and accuracy in measurement tasks. Whether in a laboratory setting or an industrial environment, these devices stand out as reliable companions for precise measurements.