Hardware Setup
S/PDIF-Out Connector: JSPD1 (Optional)
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission.
GND VCC
JSPD1
S/PDIF Bracket (Optional)
IEEE1394 Connector: J1394_1 (Optional)
This connector allows you to connect the IEEE1394 device via an optional IEEE1394 bracket.
|
|
| Pin Definition |
| |
|
| PIN | SIGNAL | PIN | SIGNAL |
2 | 10 | 1 | TPA+ | 2 | TPA- |
1 | 9 | 3 | Ground | 4 | Ground |
| J1394_1 | ||||
| 5 | TPB+ | 6 | TPB- | |
|
| ||||
|
| 7 | Cable power | 8 | Cable power |
|
| 9 | Key(no pin) | 10 | Ground |
IEEE1394 Bracket (Optional)