Micro Star Computer G52-73601X1 manual MS-7360 Mainboard On-Chip ATA Devices, PCI IDE BusMaster

MS-7360 Mainboard

On-Chip ATA Devices

Press <Enter> to enter the sub-menu and the following screen appears:

PCI IDE BusMaster

This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives.

On-Chip SATA Controller

This setting is used to specify the operating mode for SATA devices.

I/O Devices

Press <Enter> to enter the sub-menu and the following screen appears:

COM Port 1

Select an address and corresponding interrupt for the first serial port.

Parallel Port

There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and EPP features. It has the following options:

[3BC] Line Printer port 0

[278]Line Printer port 2

[378]Line Printer port 1

Parallel Port Mode
[Normal]	Stardand Parallel Port
[EPP]	Enhanced Parallel Port
[ECP]	Extended Capability Port

[Bi-Directional] Extended Capability Port + Enhanced Parallel Port To operate the onboard parallel port as Standard Parallel Port only, choose [Normal]. To operate the onboard parallel port in the EPP mode simultaneously, choose [EPP]. By choosing [ECP], the onboard parallel port will operate in ECP mode only. Choosing [Bi-Direction] will allow the onboard parallel port to support both the ECP and EPP modes simultaneously.

3-12