MicroBoards Technology PF-2 user manual Align Disc

Page 20

Microboards Technology

PF-2 PrintFactory

•Press Print Test Disc

•The Test Disc should now be printed.

•If no disc is printed, check the connection between the printer and PC.

Align Disc

There are factory default numbers for the TOP and LEFT values for your printer. These can be found on a label, under the printer cover. You may need to adjust the values, depending on the images you are printing. To run the alignment utility, please follow these steps:

In Utilities Tab, select Print Align Disc.

20

Image 20

Contents PF-2 PrintFactory Microboards Technology PF-2 PrintFactory Table of Contents Introduction Fully Integrated AutomationWhat’s Included Front Panel Indicators and ButtonsPrinter Description Installation Installing Ink CartridgesInk cartridge troubleshooting Supported Ink CartridgesInstalling Disc Guide and Output Bin Connecting to a ComputerParallel Port USB PortUSB Port and Parallel Port Installing the Printer DriverWindows 2000 install procedures Page Page Windows XP install procedures Page Page Multiple Printers Installing SureThing CD Labeler Software Page Page Page Print Test Disc Using the PrinterTest and Alignment Align Disc Microboards Technology PF-2 PrintFactory Page Loading Discs Printing Discs Page Page Page Printing on Verbatim Vinyl CD-R discs Page Printing Recommendations Setup TabPrinter Properties Page Page Features Tab Color Tab Utility TabPrint test CD Print Alignment CD Clean Cartridge Ink Level Solve a Problem Disk Loading errorPrinter not printing Out of Paper indicationProduct Specifications Low Ink indicationContact Information