Matsushita CF-W5LWEZZ1 2 service manual Mini Port Replicator Connector

EXT.

M

N

A :DC-IN Jack

B :External Display Port

If the Mini Port Replicator is connected to the com- puter, connect the external display to the external dis- play port on the Mini Port Replicator. You cannot use the external display port on the computer.

C :Mini Port Replicator Connector

Connect the Mini Port Replicator (optional).

D :SD Memory Card Slot

E :PC Card Slot

F : SD Memory Card Indicator

Blinking: During access

G :CD/DVD Drive Power/Open Switch

Slide the switch to the right to open the disk cover. Slide the switch to the left to turn on/off the drive power.

CD/DVD Drive Indicator

Off: Drive power is off.

Green: Drive power is on, but the drive is not accessed.

Blinking green: Drive power is on, and the drive is being accessed.

H :Microphone Jack

A condenser microphone can be used. If other types of microphones are used, audio input may not be pos- sible, or malfunctions may occur as a result.

When recording in stereo using a stereo microphone:

Double-click in the notification area, click

[Options] - [Properties], and add a check mark for [Recording], click [OK] - [Options] - [Advanced Con- trols] - [Advanced], remove a check mark for [Mono Microphone], and then click [Close].

When using a monaural microphone with a 2-terminal plug: With the settings outlined above, only audio on the left track will be recorded.

When monitoring the microphone audio using head- phones, sounds on the left track cannot be heard, regardless of the above settings. This is a result of the computer s specifications, and is not a malfunction.

I : Latch

J : Headphone Jack

You can connect headphones or amplified speakers. When they are connected, audio from the internal speakers is not heard.

K :Emergency Hole

L : RAM Module Slot

M :Battery Latches

N :Battery Pack

11