Matsushita CF-W5LWEZZ1 2 service manual Setting Dimm Cover, Tightening screw of Bottom Case

9.3.6.10. Setting DIMM Cover

DIMM cover is arranged making not run aground in screw tightening respect.

DIMM cover

Put the

DIMM thermal sponge

Rib application

(Space )

Do not run aground on the edge of the DIMM cover surroundings

For the cutting lack part to get on the boss and so as not to go up, affixation

DIMM heat sheet

DIMM cover sheet

The position where the DIMM cover and DIMM heat sheet is put is this corner line match.

9.3.6.11. The tightening screw of Bottom Case

Screw (a) : DXHM0039ZA

Screw (b) : DXHM0057ZA

Screw (c) : DXQT2+E12FNL

Screw (d) : DXQT2+E10FNL

Screw (e) : DXQT2+D4FNL

Screw (f) : DRHM0092ZA

The order of tightening screw : ~

When the screw is tightened, the bottom case is held and the tool is used.

	Does not run aground on the rib.
Keyboard hook	(Refer to a left chart)
OK
TOP
NG	Keyboard hook

Screw	(b)
			Screw	(d)	Screw (b)	Screw	(f)
	Screw	(e)

Screw (a)

ScrewJ18 (c)

It is confirmed that cable is not narrowing with top case between the bottom cases. LCD cable is exchanged if narrowing.

The order of tightening screw : ad

b

Screw (K1YE50000022)

Screw (DFHE5035ZB)

80