Matsushita CF-52AJYZDZM service manual Reassembly Instructions, Setting the Main High PCB

9.2.Reassembly Instructions

9.2.1.Attention when CF-52 series is repaired

•Please execute writing BIOS ID when you exchange the Main Board.

•You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.

9.2.2.Setting the MAIN HIGH PCB

Note:

After replacing the Main Board, rewrite the BIOS ID.

1.Set the MAIN HIGH PCB to the computer.

2.Fix the MAIN HIGH PCB using the two Screws <N1>. No.1, No.2

3.Fix the MAIN HIGH PCB using the two Screws <N4>. No.3 to No.6

4.Fix the MAIN HIGH PCB using the two Screws <N13>.

5.Connect the Battery Cable to the Connector (CN42).

Battery cable

<N4>

:No.5

CN4

MAIN HIGH PCB

<N13>	<N4>
	:No.6	:No.4
		<N4>
		:No.3

<N1>

:No.1

:No.2

Screw <N1> : DFHE5035ZB

Screw <N4> : DRHM0093ZA

Screw <N13> : DXYN2+F12FNL

Screws <N9>: DFHE5025XA

9-12